Ford Ranger Raptor Reverse Light Kit Installation | Tutorial by M&R Automotive | 2024 2025

Mike shows you step-by-step of powerful reverse light kit for the new 2024 Ford Ranger Raptor. These 2 LED pods are hooked up to reverse AUX wires for an easy install. Follow this tutorial and install it yourself.

~~~~~~~~~~~~~~~~~~~~~~~~~~~

This in addition to factory reverse light. The factory reverse light doesn't provide enough light output at night. Install M&R reverse light with powerful white LED light that makes a huge difference.

🎁What You Get:
(2) two LED light pods
Spot Pattern, white LED light
6000K color temperature
LED: 2 x 10w, total 20watts
Up to 2,184 lumens each with total reverse kit up to 4,368 lumens
AMP at 12v: 1.65amps each LED pod
Each LED light pod is attached to a metal bracket on each side
Metal bracket is powder coated black
No cutting or drilling required. The kit is a complete bolt on
~~~~~~~~~~~~~

LED lenses-PRO series with a unique appearance and optimal performance.

Uses TIR (Total Internal Reflection) lens is different from the conventional optics parts, which lose some light internally and produce glare. The TIR lens collects all of the light from the LED and directly leads them to where you need, drastically reducing glare and improving total efficiency.
Higher light efficiency: brighter, longer irradiation distance
Housing is upgraded to 304 aluminum. The surface is UV polyester powder coated to prevent against UV, salt water, corrosion, fading and scratch resistant.
Equipped with thermal management system that automatically adjusts the brightness output according to the external temperatures
Combo Pattern: combined spot and driving optics offers a balance between the distance and width

👍Our light kits are for off-road use only.

👋All M&R Automotive light kits are for off road use only. Please enjoy them responsibility.

✌️Have an easy install & enjoy your next adventure brighter.

0:00 - intro
0:12 - remove grille
2:34 - light bars install
4:09 - wiring
*******************

#ford #fordrangerraptor #fordranger #fordraptor #rangerraptor #fordperformance #fordtrucks #truckmods #LightBarInstall #OffroadAdventure #DIYCarMods #OffroadLighting #AutomotiveInstallation #CarAccessories #MRAutomotive #CarDIYProjects #TruckMods #cars #CarMods #lightbar #CarProjects #autotech #trucks #superduty #newtrucks #offroadlife #truckmods #automotive #offroadadventures #LightBarInstall #ledlights #explorepage #installation #installs #MandRAutomotive #diyauto #customtrucks #autotech #carenthusiast #offroadlights #tutorial #howto #tutorial #rangerraptor #fordrangerraptor #raptorranger #nextgenrangerraptor #raptorrangers #rangerraptoroverland #fordraptorranger #rangerraptorclubph #fordtrucks #fordranger #4x4offroad #fordperformance #fordsofinstagram #offroadtrucks #fordraptor #4x4trucks #fordrangerforum #reverselight

[brettro]

That makes backyard wiring jobs look neat 😂

[sworks]

Keep up the good work love the how to videos!

[drftjuice]

Do you sell just the mounting brackets?

[mariarob]

A LITTLE DISAPPOINTED! I purchased these back up lights and the 40" Pro bar. I received them both today. Both lights were in the boxes and well packaged. The Quality is obviously noticeable. However, the hardware for both light kits were just taped to the boxes in several baggies with No identification on them. I had to sort which bolts went to which kits. Then I threw one of the bags away because it was stuck to the bottom of the shipping package. I installed the back up lights today but put the Pro bar aside for another day. Luckily I checked for the hardware. For this price and quality, the hardware should be all together and inside the respective light kits. As far as the install...again disappointed. I Watched all 4 videos of your Ranger Raptor products. When I go to install the Pro bar, I think it will go GREAT because your instructions are very thorough....NOT so much with the reverse kit. You video just starts with "Here is the bolt...." then you show the bracket already attached. You REALLY should indicate that it is VERY difficult to get these nuts and bolts tightened up because the spare and the driver side harness make it very difficult to reach. Even on the Pass. side once the bracket is on, it's hard to get your ratchet there to tighten. The same thing applies to the tightening up the assembled bracket with the nylon lined nut. The space is very difficult to navigate. ALso, you should leave the wires bare and just include the crimp pieces, so that we can slide an heat shrink tube over the connection. I just removed the and used my own connectors. NOW having said all that I am very please with the product itself and am very happy that you made these lights specifically for the Ranger Raptor. A+ for getting these to the market and having good quality. I cant wait to put the Pro Bar on it. Please let me know if you have some lights for the top of the Baja bar. Would also like some amber 3 lights for the top of the grille.