How to Install 9007 LED Headlight Bulbs - SEALIGHT S1 Series

【ROTATABLE BULB's SOCKET】Here attach install video to teach you 5 minutes to install;Please flip bulb's socket 180 degrees to get high beam and low beam properly when high beam and low beam are reversed.
【SAFE BEAM】Same as halogen's light pattern(1:1）to grant perfect beam on the road, no glare to oncoming drivers,see clear and feel comfortable.

[MichaelBrown-fsph]

Video is a lot better than printed instructions! Thanks

[nicolasdupuis]

Very useful to watch before doing the job 🙂 It is also useful to watch headlights replacement specific to your vehicle. In my case, it was more complicated to reach the headlight bulb fixations than installing my new LED bulbs.

[BardelOcio]

Followed printed instructions and I managed to get this the wrong way, so low beams are high, and high beams are low. Thank you for the instructions, I fixed it

[ofus]

I saw a video the stated the high beam light should be installed on the bottom. Is this true of your product? How do I know which light is high beam?

[paulbusch]

Fit well in my ‘16 Frontier.. we’ll see how long they last.

[GauchoWoodworking]

I'm having trouble installing these. The lights that I got from Amazon are a conventional 3 prong plug ... is there an adapter that is missing?

[chrishill]

Good Lights Good Company. My 02 Dodge Ram 9007 LED conversion. Put in the passenger light wohoo no warning. Put in Drivers side, bulb out flashing lights, bummer. Called tech support went to a full VM box but, 10 minutes later they are texting me. They sent me the harnesses for free. Installed them and wohoo they work. Then I hit highbeam one went up, one went down bummer. So I got my reading glasses on and looked over the adapter ring and watched this video again and indeed when installed correctly the wire harness out of bulb when locked into place is at the 12 o'clock position. Waiting for night time to check it out. Put in the fog lights too.

[floaterxjaY]

Does the sealight 9005 & 9006 have a bulb ring as well?

[jacobduquette]

Flickers when switching from bright to dim and lamp out light shows up

[thekentuckyhillbillyengine]

Will this fit a 2001 navigator my friend is looking for leds

[jeremiahgroovy]

From the lack of replies from the company I already see that I made a huge mistake buying these. This video does not explain the lock collars being oversized for the heat sink. Disappointed and I will do much deeper research into an led replacement after returning these!

[TheBuddyLama]

You neglect to mention what to do with the wiring harness... I had to fish it through & behind the radiator frame. There's just not enough space in the headlight recess to accommodate the connector and the inline box.

Also, what are the zip ties & sticky pads for? No mention of them in the instructions, either.

2002 Ford Ranger