Renogy Rover Li 40 amp MPPT Solar Charge Controller Overview

Renogy Rover Li 40 amp MPPT Solar Charge Controller Overview - A first look at the Renogy Rover Li 40 amp MPPT Solar Charge Controller. I will be using this solar charge controller to power the Off Grid Workshop project.

Renogy Affiliate Links:

Use code DIYHOME to save 8% here:
New 12V 100Ah Pro Smart Lithium Iron Phosphate Battery
New 400 Watt 12 Volt Solar Premium Kit
Rover Li 40 Amp MPPT Solar Charge Controller
100 Watt 12 Volt Monocrystalline Solar Panel (Compact Design)
2000W 12V Pure Sine Wave Inverter
3000W 12V Pure Sine Wave Inverter
3000W 12V Pure Sine Wave Inverter Charger w/ LCD Display

REGO off-grid power system
REGO 12V 400Ah Lithium Iron Phosphate Battery w/ Renogy ONE
REGO 12V 3000W Pure Sine Wave Inverter Charger w/ LCD Display
REGO 12V 60A MPPT Solar Charge Controller
REGO 12V 60A DC-DC Battery Charger
REGO 4 Port 400A System Combiner Box

The Renogy Home app admin password is: 135790123 (Use this password to set up the admin security so you can change device settings in the Renogy Home app. Once set up you can change the admin password to what ever you prefer.

DON'T FORGET TO LIKE COMMENT AND SUBSCRIBE

Top videos you need to see:
NEW Renogy REGO Off Grid Solar Power System Overview - Massive Battery Storage Capability!
Car won't start in COLD WEATHER? Renogy Solar Battery Trickle Charger
DIY LiFePO4 Battery Build - Sun Fun Kits

If you would like to help support my channel and use the WannaBFree Amazon affiliate link, I thank you in advance for your support. As an Amazon Associate I may earn from qualifying purchases and no extra cost to you.

WannaBFree Amazon affiliate link

Link to my other channel with lots of camper van and travel videos

[DIYHomesteadProjectsDIYHP]

See the first video in the Off Grid Workshop Build

[ejdd]

Great Video, I purchased this controller (60 AMP essentially the same) for my boat and am OK with it. I use it to keep 400 AH lithium batteries charged, monitor with the BT2. My energy consumers use relatively low amperage except for the 12 volt fridge and that is somewhat low. My only issue is the Load terminals, they do not output voltage they are in the off mode all the time. It seems like the design is to output voltage when the panels are not powered (night), this makes no sense to me, unless you are simply using it for a timer after the panels stop producing. I thought the purpose of load is to use surplus energy when the batteries are topped off, that would be a great idea since the solar panels would not have any use for the solar energy after the batteries are at 100%+.

[joelywii]

I have one on my 100 watt solar setup and its keeping my 100ah lithium battery constantly topped up. No worries so far.

[alanhill]

Been running my inverter compressor fridge. Samsung 254 .Off a 500 watt pure sinwave inverter wired to load .for over a year no problem.

[Bigfish]

Just installed this controller on my boat! I have four 195watt panels that are all charging my two bank system.. house bank is six agm six volt golf cart batteries wired for 12 volts. My second bank is one HUGE 8D AGM deep cycle home depot battery to start my port engine and run my Anchor Windlass.. i would like to add my four 100 watt renogy flexible panels but not sure the best way to do it.. thought of having them just charge my 8d monster, and leave the other four 195 watt panels just charging my house bank... I expect I will need an additional controller to divide the input from the four 195's and the four 100's... Any Thanks guys!!

[jpmo]

Hi, great video, i understand that rover 40a have a maximum 100v pv input, but how many amps in the input? Thanks

[munney-b]

Go to where it has the Celsius setting and hold down the right arrow until it switches to Fahrenheit. Didn't go through all the comments so if someone already put this out then awesome

[Supanova]

If you have 2 seperate battery banks with isotlators does this charge work with it and split the load of the panels?

[calibeats]

Thankyou! i just bought one and im hypeddd!!!

[phasetinkerer]

Thank you for this video. I'm a newbie with these things and discovering free energy. Very difficult to find a good controller with good price. I think I'll go with this.

[cdawgRJ]

Would this be able to run a small tv on a camper? Let’s say 3 hours max?

[ronnjerremy]

Can you run 24 volts into the controller from the panels and charge 12vovt batteries?

[donaldd.]

I set mind up similar to you but it always goes back to factory settings. I’m stumped

[agralt]

If I connect two batteries in parallel and not in series - (2 x 110ah in parallel) and connect these two solar panels 2 x 300W, will it make a difference? can i then use 40A RENOGY or 60A?
The rule also applies here: 600w : 12v = 50A ?

[jpmo]

hi, to main questions, unit have backlight? how reset? thanks.

[agralt]

Tell me, will this 40A regulator be enough for 2x300W solar panels, or will it limit the capabilities of my solar panels? I have 2 110ah AGM 12V batteries. In the technical manual Renogy writes that 40A up to 520 Watt

[charlieize]

I have one renogy battery 12v, would this be ok to charge with one 100 watts and one 200 watts solar panels total 300 watts to charge battery every day ?

[Runner]

Just got this one for a single 100ah fed by a 100w panel I was thinking it might be to much.. seems like it’s gonna be ok!

[dangeroustoman]

How many 100watt panels can you hook to that 40amp controller?

[jaaayg]

so do i just not need a temp sensor because im using lithium batteries too ?