Adjust draw/pull weight on Tomcat Archery Set

How to video on the Tomcat Youth Archery compound bow set by Barnett.

[MamaEgg]

It’s been 6 years according to YT but this was a simple/easy tutorial on how to adjust this little bow. And I’m thankful that you posted this. Thanks, man. I hope this message finds you well.

[charleneblack]

My husband cut the tip of his finger wide open because he didn't wear gloves. Those are steel cables, and it's really hard to turn the wheel when the string pops off.

Thanks for this video. It helped with my sons bow. Simple and straight to the point. No fancy intro. Thank you alot.

[jamesbright]

Also, this is the adjustment for draw LENGTH, not draw weight. Sorry to the creator of this instructional video, but not only is dangerous and misleading, it is incorrect. To adjust the draw weight, you need to turn the limb bolts one turn each (one on top and one on bottom)along with the notch adjustments for length. (Clockwise to increase, counter to decrease) MAX is 3 turns. I understand that most looking for this information probably are not very familiar with compound bows, but anyone posting instructional videos on bow adjustments should know how to adjust draw weight on a compound bow, especially pertaining to a youth bow which would have children trying to adjust their own bows incorrectly in a very dangerous way (please see my previous comment on how to hold pulley open for length adjustment)

[nectarcollector]

Even at its heaviest draw this thing has no power whatsoever. Thanks for your video.

[xs-b]

Thank you, my wife threw away the packaging and I never would have figured this out..

[cocoloco]

At full draw, have someone to help and pass 2 of the thinnest or smaller allen, he keys to hold the draw and pulling tension. You'll be able to do it that way really easy. Have your helper to take out in inverse order the keys and you're done. It's dangerous to do it without help and some tools

[jamesbright]

Please DO NOT try to adjust the draw length with your thumb holding it drawn as it shows in this video. Even at only 20 lbs draw weight, you WILL cut the end of your finger if not your entire finger off, or at minimum do alot of damage that you will regret for the next couple of weeks. Your finger will slip, or you wont expect the amount of tension put on your finger trying to hold it. Draw the bow and take a screwdriver or Allen wrench or something similar and insert through the hole on one side to keep it drawn while you make the adjustment. You will thank me later (or be cussing yourself if you dont read this first)

[jeannguyen]

I have the same thing, is there a way to replace string? Because mine is cracking.

[KrogPog]

I almost broke my bow i recommend doing this with at least 2 people don't try yourself

[bmjackson]

I bought this same bow and arrow bobcat and I can’t figure out how to remove the arrows from the back board that the bow was attached can u make a video or can u explain how to remove the arrows they are in a tight fit

[CloudExile]

mine came without any instruction how to do this. thanks walmart

[Dcramer]

Messed my thumb up and now my string is cracking. This is draw length not tension

[josepablobecerrilchatelain]

Hello, i try to adjust my brow and i kind do a mes with mi strings, can you help me?

[josesandoval]

Como devo ajustar mi arco para tener mas potencia

[Djsencere]

Don’t try this please find a safer way then putting your thumb on the cam roller I’m 19 and I was trying this to adjust the strings and my thumb got ripped open really bad

[conneraday]

Don't hold with thumb I did and cut my thumb open

[ghulsem]

I cut the crap out of my thumb trying this method. Very dangerous.

[kimspear]

vaiuge advice tried to take my thumb off go to another video and dont listen to this person