Antminer S9 series (S9, S9i, S9j, S9 Hydro) Control Board Program Recovery(SD flashing instructions)

preview_player
Показать описание
Рекомендации по теме
Комментарии
Автор

Is there an L3+ version? The L3+ does not have the same pins to flip the jumper...??

Jimboo
Автор

Buenas.

Tengo un Antminer T15, los led rojo y verde se quedan fijos y no me permite acceder al sistema haciendo uso de la IP. Por favor ayuda

CROSS_Crypto
Автор

Hi, i have an s9 board with stock firmware. It's july2019 and cannot change fw thru web interface (signature not installerd). With SD card i get solid red/dreen led, and not reading sd card. Any advice how to get rid of stock firmware?

RustProjectAntminerRepair
Автор

i bought a machine S9i used it is all are ok but the lamp is continuesly red i put to work it starts for few seconds but after it stops and work only the power supply and only it consumes 50 watt instead of 1400.Is the problem the drive control ?can you tell me?

nikosdimitakopoulos
Автор

Hi Bitmain
I did all the steps correct and what I got is blinking control board both lights with light sound tik tik tik very fast blinking pls tell me what append to my board what to do ?

ladymaria
Автор

Hi I did all what you ve done.
Nothing work ...

yann
Автор

А что делать если контролька версии Ctrl c41 vers:1.20 ???? Пробывал так не получается!!! 1.30 норм прошивается!!!

LadaGrantaRemont
Автор

Buenas Tardes amigos, soy cliente de ustedes de Venezuela, una pregunta este procedimiento se le pude hacer a las antminer V9, usando el mismo firmware de reparacion, Saludos y Gracias

nicolaperruolomontenegro
Автор

Fala meu amigo, eu tenho essas placas mas elas não estão dando rede, a máquina reconhece mas não aparece no notebook

davidwillanx
Автор

How do i recover a bricked Ctrl_43. Which solder points and software can i use?

Raw-Vidz
Автор

Still folks out here that need this recovery process for honest reasons

Waragainstme
Автор

What is the point of releasing this video but not providing a link to the relevant software?? You say in the above link we use the same software as T9+ but that link goes to S17 software??

reginaldpotts
Автор

Buenos Días, esto se puede hacer también con los modelos T17 y S17, Gracias

nicolaperruolomontenegro
Автор

s17e device, control card with sd card using the program which I can get back to the factory software.

yasinkeskin
Автор

hice los mismos pasos que voz y ahora no me anda la antminer

juliansolis
Автор

😂 Bitmain Antminer ain't responding to comments it might be time to make the switch who are their competitors. Or at least commentors not communicating with one another to help each other out 😂 crazy

njtrukitfukit