Bobcat Lift And Tilt Not Working ? DIY Hydraulic Repair

Bobcat Lift And Tilt Not Working Simple hydraulic repair on a Bobcat model 863G.
Bobcat Skid Steer Lift and Tilt Hydraulics not working but was a cheap and easy DIY repair.
Bobcat Skid Steer Solenoid Valve Coil Replacement repair. This video is about a DIY level Bobcat Hydraulic repair for a hydraulic lock valve open circuit fault.
Troubleshoot bobcat Skid Steer hydraulic system repair. Bobcat hydraulic failed.
If you have a Bobcat to repair and hydraulic failed, check out our videos! If you would like another DIY repair video, make suggestions in comments section and we will try to help you fix your Bobcat in this case we tackle a bobcat hydraulic repair.
Hydraulic Lock Valve issue on bobcat Bobcat hydraulic failed.
I Broke my bobcat Skid Steer again !
Get a handle on things - and fix your bobcat !

[burtlade]

I don't have that problem but will keep this information in my gray matter in case
the problem occurs. Mine is an 853 but I'm pretty sure it would be the same setup.
Thanks for taking the time to educate me.

[leoacevedo]

I owe you! I have a 2000 863 I always new bob car is at the bottom of reliability and quality, but the dealer service plays the biggest part, they charged me for that and many othe things when I took ot in. It happened again 6 months later, I was about to take it back to them, even when. They told me they ware not going to do waranty, but I saw your video. Thanks !!!

[justintremelling]

That was my problem. Spot on, thanks!

[scipioamarcus]

I not speak English, i speak spanish but only whith see is very easy understand, it's a very good vídeo

[aimsmallmisssmall]

Thanks for sharing this, I just recently got a 773 turbo bobcat and this just happened to me, I replaced the solenoid and it fixed it.

[amorepreparedlife]

That is a common thing to go wrong... Happened to my skid steer last year. It was a bit of a hassle but I was sure glad I could fix it myself and didn't have to wait for the shop to get around to it!

[Melicoy]

Thanks for the great video !!!
I fix this and will get RID of my BobCrap. Way too many issues

[bruceknowlton]

Thanks just had my bobcat t190 do same thing shut it off and when i came back to troubleshoot .i started it and it worked okay?

[arttuttu]

Hi
What's the name of that valve?

[garymatusavige]

I shimed mine then slap it back in the pedal locks I welded them in and auxiliary we built a set screw to turn the ho on and off I tried replacing them it could of been several grand with computer harnesses and handle I spent about 100 at machine shop my buddy makes them so they cant break if it's just simple wire like your I'd fix but mine was everything

[bradkaberline]

If has been sitting for a while possibly a hydro value stuck open or shut but electric over hdyrdo so could be wire or the cylinoid it self. That bare wire I'd wrap with electric tape to keep it from rubbing the coating off. I liked the case 1845 1840 they was good machines the 90xt the last good case the caterpillar 289 track machines are easy to get to to work on but the first caterpillar 226 was based of the Melroe IR machines with case either case controls hand or the new one handle front and backwards and the other loader and bucket but the caterpillar 259 289 very good machines and to my on knowledge don't catch fire. I just say this because I rented a new bobcat and the sells guy tells me to get renters insurance because there is a hose that comes lose in the bottom and one has caught fire so that threw me off and would not buy one after that you'd think if knowing that's a problem they'd fix it but hey insurance works I guess. The 743 843 melroe were good machines when IR took over they went down hill. They had Kubota motors in them or duiez diesel. The John deere loders alright but had problems with a bolt that keeps the bucket pins in and they fall out when grading more than once. The track machines don't rut as bad and beat you up the tracks lgp. The early new Holland loaders good before they changed but the late 80s early 90 new Holland good the design put the motor out back a bit more for weight and the loader arms go up and out for loading trucks. The high bed trucks every loader is at is peak just to dump so depends what the operator likes but the high body beds you have to get your tracks or wheel right on the rear tires and may bust a wheel cap on the truck but thsts construction it happens nobody got killed

[cedarwood]

My left foot pedal which is the lift control wont move but the tilt pedal is fine. could this still be the same solenoid issue?

[TheZigZiggy]

Strange that I have that same 17-07 code and the lift and tilt light slowly flashes, but I don't have any problem with it lifting or tilting or driving or anything. Since I bought this used, could it have been fixed by the previous owner and the code wasn't cleared? Or do you not have to clear codes like you do on a car?

[tomasvaldez]

I got a Bobcat 873 with a no Tilt or Lift problem. Grandpa filled the hydraulic tank with diesel fuel by mistake and ran that mixture through the system. At first it locked up the whole machine, No lift or tilt and the wheels wouldn't move. Since then we were able to by pass the Bobcat safety protection valve for the wheels to unlock them. But can not locate the one for the arms or tilt. With the oil and Diesel mixture now all the way in the hydraulic system, and been sitting for 5 plus years. would that mixture deteariate the seals in the cylinders ?

[CostcoBulkBuyer]

Greetings from Alaska, my dad has a similar bobcat like yours, a little bit of an older model, 753 got it in the mid 90s. Our bobcat arm are able to goes up, but not able to go down (unless I shut the engine off and use the foot pedal) this goes for the same of the tilt, able to go down but not up. However, if I hit the aux power to on position (with two green lights on). Then we are able to move the arms and bucket with no issue. Any insights would be greatly appreciated. I look at the schematics and read forums and one guy said that your stem/coil could be stuck.

[pimmy]

I have a 2016 s510 where the loft and tilt struggles unless its full throttled not sure if theres an issue or what but im lost as to what the problem could be.

[Musicano]

Howdy, my bobcat arm is raising even when I press the down pedal. No tilt functions and blinking traction light.. any suggestions?

[cvin]

Do you suggest to change the stem also? That solidiod is the same as for the v plow

[toddcochrane]

I’m having a similar problem but my bucket and lift moves after awhile or if I shovel out my bucket then it moves again, is there a possible sensor?

[ahmadalwdani]

I have a jcb skid steer leader 135 and it doesn't move and the park break doesn't release
Can you help me
Thanks