LoRa/LoRaWAN tutorial 2: What is LoRa and LoRaWAN

preview_player
Показать описание
If you like this video and want to support me, go this page for my donation Paypal or crypto addresses:

This is part 2 of the LoRa/LoRaWAN tutorial.

In this video series different topics will be explained which will help you to understand LoRa/LoRaWAN.
It is recommended to watch each video sequentially as I may refer to certain LoRa/LoRaWAN topics explained earlier.

In this video I will explain what the difference is between LoRa and LoRaWAN.

Several products will be shown in this video.
They are not payed endorsements. I have bought all these products myself.
There are many LoRa gateway and Lora development board manufacturers.
If you plan to buy such products do your own research.

LoRa is an acronym for Long Range and it is a wireless technology where a low powered sender transmit small data packages (0.3 kbps to 5.5 kbps) to a receiver over a long distance.
A gateway can handle hundreds of devices at the same time.

A LoRa end node consists of 2 parts:
- A radio module with antenna.
- A microprocessor to process for example the sensor data.
End nodes are often battery powered.
A LoRa device (end node) has a wireless transceiver.
If this device also has sensors, this device acts as a remote sensor.
Such a device is called a mote, short for remote.

A LoRa gateway consists of 2 parts:
- A radio module with antenna.
- A microprocessor to process the data.
Gateways are mains powered and connected to the Internet.
Multiple gateways can receive data from the same end node.
The gateways can listen to multiple frequencies simultaneously, in every spreading factor at each frequency.

LoRaWAN network architecture is deployed in a star topology.
The communication between the end node and gateway is bidirectional which means the end node can send data to the gateway but it can also receive data from the gateway.

When an end node transmits data to the gateway it is called an uplink.
When the gateway transmits data to the end node it is called a downlink.

LoRaWAN how it works
An end node broadcast its data to every gateway in its vicinity.
The gateways forward this packet to the network server.
The network server collects the messages from all gateways and filters out the duplicate data and determines the gateway that has the best reception.
The network server forwards the packet to the correct application server where the end user can process the sensor data.
Optionally the application server can send a response back to the end node.
When a response is send, the network server receives the response and determines which gateway to use to broadcast the response back to the end node.

The LoRaWAN protocol does not support direct communication between end nodes.
If you want direct communication between LoRa devices without the use of gateways, use the RadioHead Packet Radio library for embedded microprocessors.
It provides a complete object-oriented library for sending and receiving packet sized messages via a variety of radios such as LoRa on a range of embedded microprocessors:
RadioHead does not have an official GitHub repo but several people have cloned the Radiohead library on GitHub.

The LoRaWAN protocols are defined by the LoRa Alliance.
It is a non-profit organisation of more than 500 member companies, committed to enabling large scale deployment of LPWAN IoT through the development and promotion of the LoRaWAN open standard.
More information about the LoRa Alliance:

Check out all my other LoRa/LoRaWAN tutorial videos:

Subscribe to my YouTube channel:

The presentation used in this video tutorial can be found at:

#mobilefish #lora #lorawan
Рекомендации по теме
Комментарии
Автор

Complete series is simple and easy to Learn ....thank you

seshansesha
Автор

In the meantime "LoRa Meshtastic" has emerged. We have a ( sailing ) dinghy racing use case. The floating buoys have a Battery powered GPS LoRa module and the Rescue boats also have LoRa GPS units. The Start Box has an Wifi LoRa unit so that all Buoys and Boats can be mapped onto a Google Earth map for measuring Course length for VMG calculations and Rescue Boat locations for safety management and for course management.

andrewpaterson
Автор

Many thanks for your video! very good system.

fly
Автор

Thank you! I really apreciate the well explained video!

grapeblues
Автор

so the points, lora is the module(physical) and lorawan is the name of protocol, right ? if i have one node with 915 mhz freq, and i made a gateway(used radioahead library), then node can broadcast the data to the gateway, the comunication about that (end node and gateway) with that freq it can be called lorawan ?


many thank's for your video sir

fitrafirdaus
Автор

thanks very mucho for series videos, is very help me

johnnysepulveda
Автор

Very nice. Thanks.
Instead of Concentrator, perhaps the term packet-forwarder should be used?

Ashnox
Автор

An interesting first step towards an open source Internet II. In my opinion :) Im willing to start with bidirectional 300 baud!! lol..Cheers.

jsmythib
Автор

Thank you very much. You are doing a great Job!! much appreciated. Please advise what are the documents/forums I should read/follow to enrich my knowledge about Lora NS, GW, and devices. I've been in the telecom and internet market for 20 years now but not on the SW side at all :) how can I start to learn more about the SW applications and application server?

mikebeshay
Автор

Please tell the command that is use for receiving data back in Lora device🙏

ShubhamMishra-zjny
Автор

Please could you explain if some reselection or handover process is supported (as mobile nerwork does) when a sensor goes from one LoRa GW coverage to another LoRa GW coverage. Thanks in advance

dannytaipe
Автор

is it same between Network server in the LORA environtmen with the IoT Platform in the IoT ecosystem

allugoroenterprise
Автор

Very interesting! Do you explain somewhere in your videos if it is possible to connect an endnote directly to a let's say smartphone APP via wireless, Bluetooth or alike without going through a LoRaWAN network?

techart
Автор

so your nme is mobile fish does that mean that your mobile is water proof ?

mohammadahmadalbanna
Автор

Is it possible to convert video into the data stream in such a way that it can be transmitted through LoRa technology ?

ShubhamSharma-uerb
Автор

can we make a 70 km range distance with LoRa? please help me to know

hibabinous
Автор

Hey I want to know does we can create a lora network with unique id for particular lora
As SIM cards does

villagerindia
Автор

sir can you explain what type of antenna is used in LoRawan end node?

suriyapriya
Автор

How to use radio head library for communicating between two LoRa nodes? are there any example videos.

pdeepakjayan
Автор

hello thanls for the video please tell me can a two end nodes talk with each other i mean if i can use a modbus protocol and converted to lorawan protocol and send packets

habderrahman
join shbcf.ru