MikroTik and Zerotier

Finally, the video you have been asking for. How to quickly set up Zerotier in a MikroTik router.
ARM/ARM64 MikroTik router required for this tutorial.

[KeithMoon_nz]

I just got myself a hAP ac2 and put zerotier on, followed your guide, put in a couple of routes, now I can access my NAS and raspberry pi from anywhere from my phone etc. I am really pleased.
next I'll set it up for my wireshark packet capture devices and raspberry pi drop boxes.😀

[georgilazarov]

Amazing tutorial, I hope the next video will be how to set up the Zerotier controller on RouterOS

[just-a-waffle]

I’ve had opnsense running in a VM with routes in my CCR2004 to get to ZT, was happy to replace it with the new ZT integration in routerOS, and it’s been working amazing

[daniszabo]

One thing is missing :) for this to work you need to enable managing on the zerotier interface. Mine was off by default. Also if you want to route traffic both ways you can change the NAT masquarade setting to have ALL as output interfaces. These settings made it work for me.

[sandro]

BROOO thankyou so much, this really helped and the tutorial was really easy to use as well :)

[zakariaalimahdi]

This was a helpful information and it's easy to use it as well. please add to the other mikrotik versions not only version 7 thank you so much

[TheAdham]

please, bring this feature to more routers

[asho]

the version of zerotier on tik is slightly old? also, how do we implement policies when running the self hosted controller? It seems that a couple of feature are missing, otherwise this is a great package. And yes, as others have said there appears to be no h/w acceleration

[martinsilcher]

I've been using ZT since it was available in ROS 7, it has a lot of potential! Downside is that there is no hardware encryption available at least on ARMv7 (32bit) and the CPU gets overloaded quickly delivering low throughputs. I had no chance to test it on ARMv8 (64bit) so far, hopefully it performs better.

[beningodfrey]

Next please implement Tailscale as well! I’ve found it to be much more reliable and user-friendly than Zerotier.

[Yegva]

Hello, thanks for the video, I have a question, can I send a Wake on Lan to my Synology NAS in this way? Thank you.

[dfvideo]

Is it possible to add managed routes in you use Mikrotik as a controller?

[sniperus]

Not bad. I liked the bot. I launched it, but I don�t understand how to set it up

[mikeselltgmail]

This is great, but I'll have to get all new routers for it to be of any use to me since mips isn't supported 😕🤷 Is there any chance of mips being supported in the future? I have been using ZT for a long time via routing on a raspberry pi, but it works be really nice to host it off the Mikrotik itself.

[palwindersingh]

I would love to see Tailscale support added to MikroTik as well.

[SiBex_ovh]

CCR1xxx are on TILE cpu... not ARM. We can use WireGueard + VxLAN or old school BCP+EoIP. But WG often stops communication and cannot be used for now as production (SUP-94949)

[omidrahimi]

Is it possible to route all the traffic of one pc through another one?
I managed to see my home PC at the office using ZeroTier but I could not route all the office traffic through my PC at home.

[pankajmazumder]

Will it support in hAP lite and can i access the LAN devices remotely from anywhere ?

[wucwedw]

I use zerotier since the very implementing controller functionality on hap ac3

[nurn]

I think ZeroTier should be positioned as WAN network, and you should use a secured tunnel (IPSec for instance) over this connection.