Removing A Differential Carrier Ring Gear and Pinion from Straight Axle Jeep Truck Suv / xj jk jl

Tools used

**If the video was helpful, remember to give it a "thumbs up" and consider subscribing.**

Video Recorded With

Triple Cold Shoe Mount Gimbal Extension Bracket

[BrotherBear]

Just watched your video and successfully removed the differential (which ended up being shredded) from my ‘70 Chevelle. Thank you! :)

[OrlandoYbarra-tl]

It saved us money, thank you for your knowledge. Much appreciated

[jc-lkfp]

Great video. What was the size of the nut on the pinion?

[mobius-]

Very nice. And very well detailed Much appreciated. Putting a locker in an 02 dakota with a 8.25 rear

[michaelmerx]

Any reason why my diff is not coming out I have removed the rear end axles it's four bolts that hold it in but the diff casing is not coming out at all???

[tomn]

Hello, I’m working on a Chrysler 8.25 and the bolt holding the cross pin is stuck. I’m concerned I might strip the bolt if it doesn’t move. Any tip for removing the stuck bolt? Thanks.

[mmDJ]

what is an alternative if a pointed chisel air hammer doesn't force out the Pinion. I've tried heating it up and hammering but I can't free it up 😕

[randy]

carrier will not rotate to get to center pin bolt, to remove c-clips?

[GearsAndGuns]

I have a 5 ton winch trying to pull my ring gear out and she ain't budging! Any ideas? It's on a dana 60

[anonymouscommenter]

Loosed yoke nut when tires are on ground.