Autonics Tutorial : Using Encoder & Counter - Position Control

Показать описание

Model : E50S8-360-3-T-24, CT6M-2P4T

00:00 Intro
00:16 Encoder Applications
00:41 Introduction of Products
01:10 Connection of Encoder and Counter
02:01 Setting Parameters of Counter
04:27 Setting PS1 and PS2

Рекомендации по теме

Комментарии

How can I configure the CT timer/counter to show a flow rate? I have two flow meters and I want to take the difference of the flows and display it as flow per hour? For example, fuel flow for a diesel engine?

vassilshtonov

Can I count yards/ Mtr by this Counter Meter?

nurolislam

Buenas, tengo este contador y en la entrada lo conectare a un encoder, mi pregunta es: en que lógica de entrada lo pondría, PNP o NPN? gracias...

marcoantonioguevaramartine

Greetings,
I'd like to make a reset option for ps1 and ps2 parameters
The reason why is I want to make the counter starting point value of 720, then I make 2 spins to the encoder(Cloakwise spin), now my value would be 1440, I have set the PS1 with that very same value, which means it will proceed to activate the C output mode (which restarts the value to the start point value, in this case is 720), after restarting the counter to its starting point, I spin the encoder once, but this time to the opposite direction(Counter cloak wise), reaching the 369 value, and then my counter will reset to its starting point, but there is a problem;
When I reach 1440 the PS1 LED lights up, but there is no reset of the value, it keeps counting to the infinity and beyond instead, but if I spin it in countercloakwise until I've reached to 360 it will restart to its starting point, how can I make ps1 & ps2 restart after both have reached specific values?
Thank you for your time

angelcru

Este modelo de encoder pero a 150rpm para programarlo a un contador/temporizador CT6M-1P

oscarlara

Autonics Tutorial : Using Encoder & Counter - Position Control

Autonics Tutorial : Using Encoder & Counter - Position Control

Autonics Tutorial : Using Encoder & Pulse Meter - RPM Measurement

Autonics counter setting tutorial connect with encoder.

AUTONICS MP5W USE LINE DRIVER ENCODER WITH EXTERNAL POWER SUPPLY

AUTONICS ENC 1 METER OUTPUT DISPLAY 1 METER AT COUNTER MEASURE .

E50S8-360-3-T-1 | Autonics Rotary Encoder #encoder RadicalTechArt I RadicalTalks I RadicalTechMart

Autonics Tutorial : How to troubleshoot incremental encoder

Autonics rotary encoder Z-Phase

AUTONICS MP5W + encoder part 1

Autonics absolute encoder 360 ppr. #shorts #autonics #encoder

#ENCODER#ROTARY ENCODER#AUTONICS#E50S8-360-3-T-1#PRODUCT IMAGE

Encoder Wiring for Stepper Motor Control #howto #steppermotor #wiring #encoder

AUTONICS MP5W + ENCODER PART 2

15.autonics with encoder

How to synchronize stepper motor and encoder? #steppers #stepper_motor

autonics encoder and counter

4.autonics with encoder

Using Rotary Encoder with Arduino | TM1637 LCD Display

Speed Measurements meters using Encoder and Autonics Pulse Meter MP5W | Parameter Setting |

14.autonics with encoder

Rotary Encoder Wiring/Connection with PLC II What is Rotary Encoder? (Autonics E40S6-2500-3-T24)

Cheap 3D Printed Absolute Encoder Knob #Shorts

EPS machine spare parts | Autonics Rotary encoder | E50S8 600 3T24

speedmeter&counter& rotary encoder for speed & length measurement#mp5 #CT6 #ENC #autonic...