PD INJECTOR REPLACE AND SETUP 1.9 TDI PD BXE

preview_player
Показать описание
#pdinjector #replaceandsetup #skodaoctavia2facelift
Рекомендации по теме
Комментарии
Автор

Pump / jet in 1.9 TDI 115, 130, 150, 100 and 105 PS group VAG

maurobeadelouzai
Автор

👍👍👍1000лайков, свечи накала выкрутил и компрессию уменьшил, BRAWO.

RUS
Автор

Esta bien pero a Cámara rápida y sin especificar el trabajo de 0A10::6

juanhernandezgarcia
Автор

Great upload nice & clear, was that number 3 injector that was removed or what order are they in, tks 👌🇮🇪

derektierney
Автор

When you pulled the rocker cover off 🤔 hahaha who seals a rocker cover like that xD

AdammP
Автор

Wish you could do a separate video on injection timing this time talking and explain why remove glow plugs and how did you find out the correct position to tighten the injector rocker nut...

Njabuloaka
Автор

Pushing the injectors in by hand isn't enough and the bolt will not pull them down. They need to be tapped down.
The hold down bolts need to the torqued and angle tightened down properly. The nip he gave them here will lead the injectors rocking and eating the head.
The injector rocker adjustment should be done with a dial gauge not best guess.

ItsFriscoBaby
Автор

Hello, I am getting a code in my skoda Laura 1.9 TDI PD is P1267 can you please tell me what can be the fault

maiasmegha
Автор

What was the symptoms from the faulty injector, how to check the injectors are faulty ?

Atopmechanic
Автор

such a good video but you should slow it down when needs to be understanding the important parts (;(( anyway I've just done this on my Caddy a few hours ago! And honestly I like that you took some efforts and wrote the ( T.wrench nm )on the screen. Thanks BTW if you would lift up the car a bit and put on the highest gear you can easily rolling the wheel to get your position of the camshaft ....

barneyjakobk
Автор

When i pulled my injector, the piston filled with fuel so I've changed the oil but now its back together it won't start. Did you need to prime the injectors and if so how?

julianheath
Автор

Did you sucked rest of fuel from the top of the piston when you pulled out the old injector?

JohnWick-yhkn
Автор

Jackson Kimberly Anderson Lisa Garcia Margaret

fullermarshman
Автор

Обычные горе люди посмотрят и так же херого сделают. Хотя, думаю, это Миру и нужно!
Как визуальное пособие что внутри, пойдёт:)

aacc
Автор

Hola, buen trabajo 👍
Como has limpiado el asiento de la junta?

juanantoniobarbarodriguez
Автор

Harris Carol Young Angela Lopez Christopher

PhilemonMortimer-qo
Автор

Hi, I had just completed 2, 51, 000 kms from my 1.9 tdi PD deisel engine. I am facing issue in Starting when engine is hot. When it is cold it get start smoothly but when it gets hot, it starts getting trouble in starting. I had checked the starter motor and ECM both are working fine. No any faulty code when i scanned.
Could you please help me with the solution.
I will highly appreciate your response.
Thanks

kushal
Автор

Eu trebuie sa schimb un injector la un passat b6 2.0 tdi, , trebuie sa il schimb pe cel defect sai trebuie toata 4 schimbate..?

crocodilu
Автор

Is it 100% necessary to remove the glow plugs as I’ve got a 105 BKC and 3 of the glow plugs were rounded and just keep spinning and I wanna swap the injectors but i don’t want to fuck about with drilling the glow plugs out ?

cameron
Автор

Normalement on utilise un extracteur pour sortir l'injecteur-pompe. Les vis doivent être remplacées après chaque démontage car elles sont vissées à l'aide d'une clé dynamométrique puis on termine par un serrage angulaire. Une vis serrée au serrage angulaire s'allonge c'est pour cette raison qu'elle doit être changée après chaque démontage

Mike-ykmt