cut g10 at 60000rpm

preview_player
Показать описание
Second cut of my 60KRPM spindle. 3.175mm G10 with a 3.175mm cutter full depth pass
  1. Paul Kelly
  2. g10
  3. 60000rpm
  4. cnc
Рекомендации по теме
cut g10 at 0:02:21

cut g10 at 60000rpm

JS-660 with 60000 0:00:15

JS-660 with 60000 rpm spindle processing close-up.#cncmachine #cncmachining #cnc #machine #fyp

CNC Machining Black 0:00:18

CNC Machining Black and Grey G10 Knife Grips

Cutting G10 control 0:00:48

Cutting G10 control horns with 1/16' router bit on Multicam

The spindle can 0:00:10

The spindle can choose to configure 40000/60000 rpm！#cncmachine #CNCmachining #CNC #fyp #machine

G10 milled with 0:00:59

G10 milled with 1/4 extended YG-1 V7 endmill 2/25/18

Drilling G10 Fiberglass 0:00:46

Drilling G10 Fiberglass Plate

#Microdrill 60000rpm 0.15-4mm 0:00:08

#Microdrill 60000rpm 0.15-4mm with DOBEMY auto #CNC machine

Microdrill 1.5-4mm 60000rpm 0:00:08

Microdrill 1.5-4mm 60000rpm high-speed CNC machine

Machining G10 on 0:12:00

Machining G10 on a C.R. Onsrud 148HD18H2 Dual Process CNC Router

special materials G10 0:00:52

special materials G10 laser cutting show/www.laser-solution.com

Cutting G10 Under 0:01:45

Cutting G10 Under Water.mp4

Milling G10 Hydrofoil 0:00:15

Milling G10 Hydrofoil Wings

P39 Flaps - 0:18:28

P39 Flaps - Cutting G10 (preformed fiberglass panels)

fr4 g10 cnc 0:00:44

fr4 g10 cnc machine

G10 FR4 milling 0:01:01

G10 FR4 milling Rc control horns

NEW Air Turbine 0:00:33

NEW Air Turbine Live Tools™ 60,000/80,000 RPM for #lathe & #cnc lathes - Cut cycle times 6 – 10x...

Using G10 to 0:00:16

Using G10 to make a 1000 follower YouTube play button.

60,000 RPM to 0:00:23

60,000 RPM to 80,000 RPM on Tornos

CNC milling G10 0:06:28

CNC milling G10 Knife handles

68-405 1/4' PCD 0:00:51

68-405 1/4' PCD Ballnose Tool Cutting G10 Video by LMT Onsrud

ATC Spindle 0:00:07

ATC Spindle NAKANISHI EM3060J 60,000rpm

High Speed G10 0:01:42

High Speed G10 milling

Water Jet Cutting 0:01:10

Water Jet Cutting G10 Fiberglass

Комментарии
Автор

Few years ago when you posted this! But I'm just wondering if you have any thoughts on the motor now, since I'm thinking of buying one but can find almost no reviews online about them, no reviews at all even on aliexpress. Especially curious if they are suitable for more precision work, since they only have 2 bearings. I only need to run at around 24k rpm, just need a small er8 motor.

TheMastaRob
Автор

Have you run this at 60k for very long? I have what looks to be the same spindle (mine is a 300w from keling/automationtechnology) I ran a long cut with it at or near 1kHz, and burned out the bearings (smoke was coming out.) Got a replacement, but notice the front end gets quite warm and power jumps up (unloaded, ) when going much over 40k.

skrubol
Автор

I am guessing you are going far far too slow for 60krpm

ricardrinaldo