filmov
tv
6 wheel ISUZU GIGA 8 ton airport Foam water tender fire engine vehicle
Показать описание
6 wheel ISUZU GIGA 8 ton airport Foam water tender fire engine vehicles are necessary equipment for fighting fires in petroleum, chemical, industrial and mining enterprises, and port cargo yards.
Because it also has the performance of a water tank fire truck, the correct use of foam fire trucks is a problem worthy of attention for every fire commander. Due to the special performance of foam fire trucks, most of the fire scenes faced by this kind of fire trucks are petrochemical and other dangerous fire scenes.
This type of fire has the characteristics of fast burning speed, frequent changes in the fire scene, high probability of explosion and burning, and great threat to fire trucks and combat personnel. Therefore, in order to make the foam fire truck reach a favorable position on the fire scene, it can quickly start a fire fighting. The following points must be noted:
1. The foam fire truck should use the side and rear to face the fire field, quickly discharge water and increase to appropriate pressure (take Dongfeng fire truck as an example, the pressure is ≥0.686MP when using the PQ8 gun, and the pressure is ≥0.785MP when using the vehicle-mounted gun), then turn on Press the water cock, then open the bubble tank outlet ball valve, adjust the mixer to the proper position, aim at the center of the flame, and spray the foam liquid.
2. When using foam guns for close combat, the fire truck should be protected as necessary according to the fire situation. Asbestos cloth can be used to cover the car body, and water mist can be used to cover it when necessary.
3. During the entire fire fighting process, the driver must stick to his post, constantly pay attention to the instantaneous margin of the car's foam liquid, and fill the foam liquid in time. Once the foam liquid is used up and refilled, it will inevitably affect the entire fire fighting operation.
6 wheel ISUZU GIGA 8 ton airport Foam water tender fire engine vehicle Specification：
Because it also has the performance of a water tank fire truck, the correct use of foam fire trucks is a problem worthy of attention for every fire commander. Due to the special performance of foam fire trucks, most of the fire scenes faced by this kind of fire trucks are petrochemical and other dangerous fire scenes.
This type of fire has the characteristics of fast burning speed, frequent changes in the fire scene, high probability of explosion and burning, and great threat to fire trucks and combat personnel. Therefore, in order to make the foam fire truck reach a favorable position on the fire scene, it can quickly start a fire fighting. The following points must be noted:
1. The foam fire truck should use the side and rear to face the fire field, quickly discharge water and increase to appropriate pressure (take Dongfeng fire truck as an example, the pressure is ≥0.686MP when using the PQ8 gun, and the pressure is ≥0.785MP when using the vehicle-mounted gun), then turn on Press the water cock, then open the bubble tank outlet ball valve, adjust the mixer to the proper position, aim at the center of the flame, and spray the foam liquid.
2. When using foam guns for close combat, the fire truck should be protected as necessary according to the fire situation. Asbestos cloth can be used to cover the car body, and water mist can be used to cover it when necessary.
3. During the entire fire fighting process, the driver must stick to his post, constantly pay attention to the instantaneous margin of the car's foam liquid, and fill the foam liquid in time. Once the foam liquid is used up and refilled, it will inevitably affect the entire fire fighting operation.
6 wheel ISUZU GIGA 8 ton airport Foam water tender fire engine vehicle Specification：
0:00:35
0:01:00
0:06:18
0:00:25
0:00:15
0:01:54
0:01:08
0:00:48
0:03:33
0:04:28
0:03:44
0:07:13
0:06:58
0:03:22
0:00:09
0:00:45
0:07:12
0:09:14
0:00:36
0:01:11
0:01:31
0:10:09
0:01:59
0:06:35