BobsCNC Evolution 4 Install/Software/Cutting

This is a video on the Assembly and Software Setup of the all New Evolution 4 CNC from BobsCNC. I also take you through the processing of tramming and making your first cut with this cnc.

Save $10 on the purchase of any Bobs CNC.
Promo Code: WoodenCreationz
Offer Good Until Nov 29 2022

Affiliate Links:

Video Menu:
What you need before getting started - 1:05
Emergency Stop - Bit Stopper - 2:35
Assembling Z Carriage Assembly - 3:46
Assembling Gantry Assembly - 8:33
Assembling X Frame Assembly - 18:41
Cutting/Attaching Belts- 20:21
Wire Self Squaring Gantry - 24:33
Installing Software (Arduino, Flashing Controller, Java, UGS, ) - 27:43
Learning How to Connect/Home CNC in UGS - 36:06
Trouble shooting Homing issue - 40:46
How to Tram your CNC - 41:32
Fixing your Zero/Starting point - 41:52
Setting a Zero - 42:31
How to Open Gcode File in UGS - 42:53
Turn on the Router and Make a Cut - 43:03
CNC cutting at 40inches per minute @3 Passes - 43:36
Finished Results of the Sign cut on the CNC - 44:02
Final Thoughts / Speed Tests - 44:33
Bit Stoppers/Bit Dusters - 45:37
Highlight Videos from my Youtube Channel - 45:44

---------------------------------------------------------------------------------------------------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------------------------------------
WoodenCreationz -

[WoodenCreationz]

Save $10 on the purchase of any Bobs CNC.
Promo Code: WoodenCreationzSentMe3205
Offer Good Until Sept. 17th 2022

[dwyn]

This is infinitely more valuable than a lot of other AI-narrated disasters in other videos out there! Proof that humans will win, in the end! This was really helpful in helping me decide whether to buy the CNC quantum max!

[ChadThompsonMyLife]

This video was perfect for me! I think Bob should add it to his site. Your videos are much better than the shop talks from Bobs CNC. I highly recomend this video to anyone considering a bobs cnc.

[bigbee]

Brand new to CNC. Watched this before I was fully decided on buying one. Just got my Evolution 4 and clear coated everything. I started the first part of the assembly and for all the parts, it's not terribly difficult. However, reviewing your video now is very helpful and making it much easier. Hope to have it up and running today!

[redherring]

I got an X Carve over a year ago, did great, and a couple months ago upgraded to a 1500x1500 queenbee and I still watched this whole video, dunno what it is about this Bob's CNC but it looks cool and fun as helll, like a steampunk aesthetic, like a Red Dead Redemption CNC machine lol

[Dcvmnaturalist]

Great video that I’ll definitely use when I get my Evolution 4. Thanks! YouTube’s getting out of control with 2 commercials every 4 mins on this video. Take it easy!

[ClintonCaraway]

I've heard of Bob's CNC for years but never really thought it was a serious machine just due to the pictures mainly on Instagram. After seeing your video I think it is rather ingenious. It looks like a great affordable way to get people started into the hobby.

[mikelane]

ANOTHER Excellent video!!
You touched ALL bases! That makes it an official HOME RUN!

GREAT JOB!

[chrisp]

Ran across your video by looking for info on cnc machines. Not sure if I will be buying a bobs but I just wanted to let you know that this was one of the best step by step instructional videos that I have seen. cnc, s are expensive and it will be a big purchase for us so I am glad that I was able to see this video. Thanks for the information.

[johnnyspropshop]

Brian most excellent video as expected. I'm down to final assembly and waste board setup. Keep those project videos coming.

[BudjetBassin]

Thank you so much for your tips!The magnet trick is such a time saver!!!

[KeshaColeman]

I’m considering this as a purchase. I’m extremely nervous! Your video was informative!

[graphiexp]

Hi, excellent training video but I have a question, if you're design in vcarve pro, what is the post processor you are using for open the file in UGS? Thank you.

[devincomiskey]

Thank you for the clear instructions at 12:26 with the wide belt adjuster. Bob's instructions at this step (13e) are very confusing, as the first pic shows painters tape on a different part.

[christopherdubour]

Great video. I’m surprised I wasn’t already subscribed, I must only have followed on insta! Watched this video because I just found a lightly used Bobs CNC e4 and am tempted to impulse buy my very first cnc! The price is right, and ive wanted to get one, but have always been limited by cost. I gather you recommend Bob’s machines, and I’m curious if you would recommend this to be my first? Thanks in advance. I’ll be sure to watch your other cnc related videos if I join the cnc team!

[Bamaoutdoors]

Thanks for the video. Just in time Im almost ready to get out the computer. That's were it my go south with me! Stay tuned lol!

[SUDSY]

Thanks for the update. Better news than fox or CNN!

[brianathey]

Was wondering how much your stop button assembly is?? Also if you thought about adding a speed controller to it?? Enjoyed your video just purchased one waiting for ir to be delivered.

[dalebrown]

Where did you hook the bit stopper to in the back

[jasonlong]

Great video. I have the E3 and it has been a great little machine but it is showing it's age. I have pulled the machine apart, replaced the belts. cleaned all bearings, rollers, rods and dry greased the threaded z rod but I still have the issue of my homing stopping in the middle and I have to home several times to get the machine to the home location. also the software keeps locking up after I run a code and I have to turn off the machine re-home and then try to get my zero location back. this has caused a lot of fine details to be off. I loved my E3 but I have purchased my Onefinity Cnc Woodworking cnc. stainless steel tube frame all ball screw rods with nema motors. For only 2495.00 including shipping and z touch and gaming controller and suckit dust boot dust collector pro kit is a no brainer. My main issue with Bobs cnc machines is that if you don't have a very good dust collection then you machine gets covered in dust and is my arch enemy. The OneFinityCnc has sealed bearings on ball screw threaded rods and stainless steel tubes so no dust will get in and make your machine miss a step. I thank Bobs Cnc for getting me off the ground but I have to move to a more stiff machine to get better quality and accuracy. Last thing I could run my E3 at 70 ipm with no major problems you just have to set your depth of cut and coding right and it will run fast.