Bushings replacement on a torsion bars rear end.

If you have a front wheel drive vehicle,you certainly have a torsion bar equipped rear end.
It's generally what is found on those cars : it's more economical to produce,and do not require wells on the body to locate struts,so you gain a bit of room in the rear seat area.
However the suspension do not work as vertically as with a strut system.

[Tubecraft]

This man is a legend doing this on the floor with limited tools and great video no nonsense

[chrisf]

Thank you! Years ahead of today’s media trash…
Simple, explanatory, amazingly well filmed.
Thank you kindly for taking the time! Think the puller should be pulling on the outter housing bush.
No reference as such to this procedure in the Haynes.

[train]

Awsome help sir, thankyou loads, this will help me fix my good freinds 2001 scenic😊😊

[АлексейИгошин-зя]

Хороший ролик, инженеры Рено были бы в восторге от такого ремонта! 👍 Однозначно Лай, когда для ремонта есть только Молоток да зубило💪

[ilijabacanin.ika.parket]

Svaka čast, meni isto otišlo to na torziji, na Reno Kangoo, niko neće da mi reparira, moram novu da kupim, svaka čast...

[itsme]

The dog was impress by your invention, good job

[willemstreutgers]

Put the bushing in the freezer for 24 hrs. and you can mount it almost by hand.

[zxztv]

Yes the chisel is crude, but it works so well :-D :-D.
I had a problem getting to a clutch, A rotating nut and bolt on a bell housing flange, rusted together solid for life, One chisel and a lump hammer sheared the head clean off.
Plenty more 1/2 inch or 13mm nuts and bolts in the shed, ready to be used :-D.

That looked like a pain to do, gravity wanted everything, it always does.
Putting the arm back on looks so easy NOT!! lol, bloody pain!!.
Nice little tune on the file :-D.

Puss looked a bit ill :-(, and later it learned to climb legs, just wait untill you wear shorts, Oooow very painfull ha ha :-D.
Doggy just wants to have fun.

[sanya.]

Hello! Could you help me with the article number, based on which I can find the bridge fixing screw?

[andyward]

Doesn't show the ending of fitting the bar, goes to his cat, wtf 😂

[timdogsoo]

I have a Renault kangoo van converted for wheelchair access.
The rear suspension seems to have dropped? I think it might be those adjustment teeth have worn out because of the extra weight will check if the teeth have failed. Thanks for the vid.

[jfjjjjfj]

Wrong model for me, but saw a comment about a cat. So jumped to that part instead ❤❤

[leandromarcelomanini]

Caracas está de parabéns primeiro vídeo que eu vejo assim que vi ele todo sem adiantar nem um segundo tá de parabéns nós precisamos de ver oque acontece como vc fez os outros querem aparecer fazer os show . Vc deu um show com poucas ferramentas e bastante experiência parabéns felicidades e sucesso

[Wholistic]

Hello Michael,


First of all, thank you for such a detailed video! Would you be kind enough to explain something? For the final step, starting with minute 13:00, is there any measurement or any way that you took into account the position of the metal arm that gets pressed onto the new bushing? I haven't done this operation on my car yet, and to my understanding, the angle at which you press the arm at this step will determine the height of the vehicle, since the bushing is immobile by its nature. Is my assumption correct?
What's more important is that, I believe that if you do not respect the angle of mount of this arm, the new bushing might even break, right?

[appelflapdrol]

Hello good sir, I was wondering what the reason was for replacing the bushings? On my Kangoo of the same model, one of the rear wheels is suddenly lowered to the point the rim is almost in line with the arch... Could this be the fix ?

[davidcornuault]

Salut c est super la vidéo c est tu bon boulot un gros pouce bleu

[Nikdrak]

Greatings, on my Clio mk1 ph3 '98 i have clunk noise only on the right side of torsion bar, no matter how big is bump or hole. Is that a problem with bushing on arm or something else is broken?

[hocinehellal]

Du fait que tu avais des moyens .pour quoi ne pas utiliser la presse hydraulique sur la première pièce, que vous avez sûrement bousillée

[liljustas]

lol when I saw working with three hands. Also what is this car?

[павелсторчевой]

Кто подскажет как правельно запресовать салинблоки ? На опущенной машине поставить метки или же на длину стойки пресовать салинблоки . Как правильно подскажите