Using MicroStep Stepper Motor Driver with Arduino | TB6600 (TB67S109AFTG)

This is a professional two-phase stepper motor driver. It supports speed and direction control. You can set its micro step and output current with 6 DIP switch. There are 7 kinds of micro steps (1, 2 / A, 2 / B, 4, 8, 16, 32) and 8 kinds of current control (0.5A, 1A, 1.5A, 2A, 2.5A, 2.8A, 3.0A, 3.5A) in all.

MicroStep Driver
Nema17 Stepper Motor
Arduino UNO R3
Jumper Wires
DC Power Supply
Crocodile Alligator Cable

Recommended Items:
37 Sensor & Mod

*** DIP Switch settings should be changed when power is off so the correct selection is active at power up.

Usage Areas:
Robotics
Large format Size Printers
CNC
Routers
3D Printers
Laser Engraving
Machine Automations
Camera Pan Tilt Heads
Slot Machine
Vending Machine

---

[makerio]

Recommended Items:
37 Sensor & Mod

[samilcanselklc]

man u are perfect thanks for educational video

[michaelcostello]

This is a great video. So much information with out any voice. thank you.

[NiherRD]

superb, i want to only step by step interval forward micro stepping like 6200 micro steps every 20 minnutes interval. not reverse /back step at a ttime. How can write the program code? can you help me?

[juliocesarleguizamon]

someone knows why they are called tb6600 if they have the TB67S109AFTG chip and not the tb6600

[ClownWhisper]

I appreciate your efforts. I still can't get this going. I've tried probably 10 different tutorials and getting this going and nothing absolutely nothing. I have no idea what I'm doing wrong maybe it's the dip switches maybe the controller is bad I can get the stepper motor running on an a4988 this is a pretty simple set up I don't know what I'm doing wrong. The only thing I'm unfamiliar with is the dip switches and the likelihood that they could cause total failure. I have it set for a couple of amps and 800 steps. If there is anything you could do to help me out I would really appreciate it man. I'm disabled and learning things is the only thing I can do

[silvagomes]

hello friend, good afternoon
the LEDs on this drive should light up or flash in which situations, as mine will turn red and green and will not turn off.
Your video is really cool.

[sarathiall]

I Followed all the steps, but my stepper motor shaft got stuck when powered up

[ahmadnumankamil]

can you share how to stop the motor after one full cycle

Good explanation. Why if is a 4.8-5v motor you put 12v supply?

[invaziq]

Hi. Can I add to Ruida rdworks this source code to programme the motor ?

[zohirlon]

how about 24 volt in same driver and stepper motor as you have ??

[javier.sv]

Hey man! how much need dc suply for nema 17?
I need 1, 5 Ah per phase, so 3 Ah finally?

[christianversolatto]

Hello everybody,
this project is amazing. I appreciate a lot and I ve got some questions: can I use this driver for pilot a step motor in both directions, at three different speeds with six buttons?

[dickmick]

I have noticed some drives are connected using the + as common and connecting it to the +5V terminal and then systems where the - is common. Why the differences? Can the Arduino be connected using either method? Also most videos do not mention the importance of getting the + and - connections to the motor correct. You have to know which is which on the motor or it will not work.

[manojsurya]

Hi I like all ur projects next video u make some robot

[berkedurgun]

Arduino roket stabilization yapabilirmisin

[drrobotsir]

Does anyone know what's the difference between 2/A and 2/B micro steps?

[THEBACKYARDELECTRICKS]

New tech channel support
THE BACKYARD ELECTRICKS

[wideboatbluebell]

Nice work, would have been more enjoyable without the music!