Terrible Painting Tools. Do not get scammed!

P-s-a-l-m 100:four-five

[Idahopainter]

Who has actually one of these besides me?

[mikehowell]

In over a decade of painting for a living I've tried dozens of edging tools like this. I've never found one as fast or as clean as doing it freehand with a good brush.

[byewhobayou]

Chris, I would suggest trademarking your name, likeness, and brand to prevent future use without authorization. It also gives you the legal authority to force compliance. Also, thanks for all the tricks! I started painting as a maintenance man, but with your help I’ve greatly improved my skill set and recently started my own small operation. Thanks again!

[OhBlivEUn]

You can also whiz roll + cut then back whiz if you can handle spreading a ton of paint at once but it might be inconsistent. The easiest and best way for the average job will always be an inch of a paint in a can with a decent quality brush that reduces streaks with a feathered edge. Roll immediately, preferably with a partner so all paint dries together

[joewest]

I bought, and use the Accubrush, pretty much the same thing/idea, and it works great!

[jacqjacq]

We see and agree that it's incredibly cheap! Thanks for looking out for us. I almost bought it!! We appreciate your insight!

[justsittinhere]

I have tried different paint pads with the little rollers but never that device. In my experience nothing is better or faster than cutting in with a good brush. My favorite depending on the paint is a Wooster Ultra Pro (usually extra firm) or Wooster Chinex. I like the 2 1/2" angled brush for most cutting in and even flat work.

[taliarose]

Just hand cut corners in. And if you need it super good. Tape caulk the corner, paint it and pull the tape with caulk on it off. Never go into a corner or edge with a wet or full brush. Cut it away from edge at first, then work your way in to corner or edge and make your straight line. Happy painting ALL.

[stevenkaz]

"This little paint brush will do the cut in for you"...Instantly died laughing when I realized exactly how it is supposed to work HAAHAAHAAHH

[chrisrobbins]

what about for doing a second cut where you don’t need to go all the way up to the corner?

[frankiegodinez]

I got my hands on one of these when working for a large painting company a few years ago. I ended up breaking it on purpose to use it as a regular roller as someone had stolen my rollers and had no time to run to the store. They are absolute garbage.

[norajwinn]

Thank you for this video. I was tempted but i had my doubts since i saw no other products like it. Plus the "special half off price" of $35.. Good thing i found this video.

[JohnSmith-dtyb]

Just found your channel. I decided along time ago that I’d never buy any of these painting gadgets. From brush holders to corner cutters .
Looking fwd to watching some videos to help hone my skills.. Thanks 👍

[OhBlivEUn]

I bought a paint edger a while back and it was terrible. Enjoy smearing the ceiling after getting tired of watching the wheels every dip. Just get good with a mid-high quality brush and you will be faster and have a proper finish

[xalonetv]

Definitely looks like cheap dollar store toy plastic. I remember YEARS ago when I started watching your videos, "rolling dog" send you a bunch of stiff and I actually won one of their brushes from you. 4 months later I seen Rolling Dog brand in my local dollar store. I felt so bad for you spending the money on shipping after that incident. Keep up the great content!

[smrsmd]

It also digs wheel mark lines. While going over drywall mud.

[petethehandyman]

I don’t know why there are so many painting gimmick tools!!! All you need is a good quality roller and brush!! Good video!

[doughooser]

Need you’re help… so getting ready to paint my house interior. I’m not a painter by any means and don’t have a bunch of money to pay someone . I have narrowed it down to Lowe’s valspar signature or her me depot behr marquee. Would really like to see what you think on the two and which one you would choose. Hope to hear back soon. Ps love your videos

[gregmaynard]

I've been painting for 35 years. I bought the accubrush 15 years ago and I love it. I'm on my 3rd one now. I'm rough on tools. The trick is your final pass needs to be pulled backwards. The brush leave a streak otherwise. I can cut-in an entire house walls to ceiling in a couple hours. 90 degree corners only. I guess it depends on the person using the tool.

[spencercolgan]

They advertise it on my channel too. I saw you in their commercial. I saw you on their commercial. I bought the whole gamut of accessories in 2010. It was $140 at the time. I had used it. I was painting over textured walls. The customer was selling the house. It’s a waste of money of you buy it. If you’re selling it, you’ve already made your million dollar profit after every do it yourselfer has forgotten what they’ve paid for it.