WISPA INSTRUCTION VIDEO

[JohnBoy]

my neighbours dont shut their dogs up so i wouldn't shut my darts up tbh

[miketom]

This product is an absolute game changer. So I live in a flat and my plasterboard walls thudded like a drum with my normally hung dartboard. I tried everything, purchased an anti vibration washing machine matt and foam wedges In order to kill some noise but just didn’t dampen it enough. I had enough so I decided to make an investment and just go for it and get the wispa. Best thing I ever did. £80 is a fair amount of money to drop on a bracket but it really is worth it. 0 thud makes it through to the wall, all you can hear is the sound of the dart into the board. I used a 5mm drill bit and a winmau level to plug into the treble 20 to make sure it was perfectly level. Take a stab and buy the wispa you won’t regret it

[DavidLee-teoz]

I was using a stand until wispa turned up. Brilliant. I cant see it move when dats hit at all. Was easy to put up although i think my bro in law would not manage but he cant put curtain poles up... This has to out perform the kerrala as that still has screws into the brick. Its the vibration going into the wall that creates the noise travel. Brilliant invention

[DavidLee-teoz]

Ive been using wispa a while now and am very pleased. Ive noticed alot of negativity from people who have not used one. Why would you comment when you have no experience? Fools.
When installed correctley it doesnt wobble. From the players point of view. Ive made a vid to prove this as this is a cracking product. I can play at night now without disturbing anyone. Beware of trolls. Everyone Ive come across that has tried a wispa loves it

[cadete]

Great system, certainly quiet.
To answer some comments below I have found…
1. To level the system it would be helpful to have somewhere to level the system, it’s a small pain if you don’t have tools are are not good at diy
2. I find it stable, no rattles after a throw
3. Your surround is a bit fiddley to install but you need a surround to make it solid!
4. Silly complaint, the blade 6 triple core doesn’t have registration holes!

All round I think it’s a good bit of kit, worth the spend in my opinion, and I’m sure they will continue to improve the design,

[diximat]

Tightening the cables comment. In the video it shows him tightening the bottom locking nut on the cable wire, that is the last step to tightening. The bottom nut should be loose as you tighten the top nut, once you have minimal play on the cable then tighten the locking nut, this is what keeps it in place. My first go around I was trying to just tighten the locking nut and it doesn't move at all once locked so I had way too much play. After sorting it out I have next to no movement even when pulling my darts out.

[terryread]

Right guys, I will do an honest review. I installed mine a few days ago and it does make a big difference. I couldn’t play darts after 930 because of thumping noise going through the house and I’m sure the neighbours house. my bedroom is right next door to the darts room and now we can play through the night you will get a slight noise where the darts hit the board which you will never silent A little overpriced for what it is also people are struggling to get it straight. Mine is exactly level. I used a FLAT spirit level Which I purchased from Lidl’s on the wall And sat the lower brackets on it, marked the holes and it was perfect. Did get some creaking noise from the darts hitting the board for about a day and now it doesn’t creek. Hope this helps.

[TheBigshot]

I put parcel packaging with bubble wrap inside at the back of my board works a treat. Reduced thudding sound by loads. Also very easy to turn the board around when a certain patch is getting worn.

[davidcox]

Makes a huge difference. Got it so the board is spot on straight. But did use a self levelling laser and a protractor. The one failing in this video and the instructions that come with it, is that at no point does it show how to put it up straight.

[-oz]

When you instal the wispa system and put dartboard surround it starts be louder than without the surround, need to make a smaller inner size of cirle of surround so it keeps the dartboard levitating and silent, btw i have wispa at home.

[Tizerboxx]

If I have sound proof panels on the wall, thin carpet type, would it be ok to fit this straight over the top of them?

[DartsDartsDarts]

Will this work if added onto already fitted noise reducing panels? Or does it need to be on the wall directly?

[DavidLee-teoz]

To get it straight the uppermost hole on each side should be 197cm from the floor

[BbenYT]

Does this work for the Winmau Edge Corner Bracket?

[SkyBlue-Darts]

i have a scolia home 2 already fitted to my wall, would this be a problem attaching this?

[ryanphilpotts]

Ignore any negative comments, this is the real deal. Means I can play all night long and keeps everyone happy. Neighbours say it’s made so much difference🎉

[micxael_]

Love how you have to visually put the wisps up, so now mine isn’t level

[T-FDBF]

I had the problem that my Winmau Sourround didn't fit into the Wispa and was hanging pretty loose. and every time I pulled out my darts it swung extremely. That annoyed me extremely. Should that be so?

[AFG]

What size is the drill bit for the holes?

[deanbaza]

Easy to Install, mine wobbled a bit so i tightened the wires.around 0.5 seconds of wobble now..im laughing my head off at the how do you get it level, how do you rotate the board people😂😂its so simple to do both.my family love the silence now❤❤