Problem 1-26/ Engineering Mechanics Materials.

preview_player
Показать описание
Engineering Mechanics Problem Solving.
Just read the caption and analyze the step by step solution.

The shaft is supported at its ends by two bearings A
and B and is subjected to the forces applied to the pulleys fixed to the shaft. Determine the resultant internal loadings
acting on the cross section located at point C. The 300-N forces act in the -z direction and the 500-N forces act in the +x direction. The journal bearings at A and B exert only
x and z components of force on the shaft.
  1. fave mechanics
Рекомендации по теме
Problem 1-26/ Engineering 0:01:49

Problem 1-26/ Engineering Mechanics Materials.

Problem 1-57/1-58/1-59/ Engineering 0:03:07

Problem 1-57/1-58/1-59/ Engineering Mechanics Materials

Problem 1-22/ Engineering 0:01:10

Problem 1-22/ Engineering Mechanics Materials.

Mechanics of Materials 0:03:41

Mechanics of Materials Problem: 1-3

Problem 1-5/ Engineering 0:01:24

Problem 1-5/ Engineering Mechanics Materials.

Problem 1-12/ Engineering 0:01:11

Problem 1-12/ Engineering Mechanics Materials.

Problem 1-2 / 0:00:56

Problem 1-2 / Engineering Mechanics Materials.

Fundamental Problem F3-16/3-25/ 0:03:30

Fundamental Problem F3-16/3-25/ 3-26/ Engineering Mechanics Materials.

Strength of materials 0:44:21

Strength of materials | Lecture 12 | UPSSSC JE 2024 | SSC JE 2025 | RRB JE 2024 | Civil Engineering

Problem 1-39/ Engineering 0:00:53

Problem 1-39/ Engineering Mechanics Materials.

Mechanics of Materials: 0:18:18

Mechanics of Materials: Lesson 26 - Statically Indeterminate Angle of Twist Due to Torque

Problem No.1| Resultant 0:11:04

Problem No.1| Resultant of Coplanar Concurrent Force | EngineeringMechanics | #abhisheklectures

Problem 1-31/ Engineering 0:00:58

Problem 1-31/ Engineering Mechanics Materials.

Problem 1-14/ Engineering 0:01:00

Problem 1-14/ Engineering Mechanics Materials.

IIT Bombay CSE 0:00:11

IIT Bombay CSE 😍 #shorts #iit #iitbombay

Friction in Pole 0:02:30

Friction in Pole or Ladder AGAINST A WALL in 2 Minutes!

Engineering Drawing Isometric 0:00:24

Engineering Drawing Isometric View using Drafter #shorts #engineeringdrawing #drawing #3d

Future of Mechanical 0:00:33

Future of Mechanical Engineering | What you can do to be Future-ready | News Hour

EVERYTHING on Axial 0:11:34

EVERYTHING on Axial Loading Normal Stress in 10 MINUTES - Mechanics of Materials

Asking MIT students 0:00:27

Asking MIT students their major

3 Section Torsion, 0:02:03

3 Section Torsion, ANGLE OF TWIST in 2 Minutes!

IIT Bombay Lecture 0:00:12

IIT Bombay Lecture Hall | IIT Bombay Motivation | #shorts #ytshorts #iit

Mechanical Engineering: Distributed 0:09:42

Mechanical Engineering: Distributed Loads on Beams (2 of 17) Find Distributed Load on Beam Ex. 1

How much does 0:00:26

How much does a MECHANICAL ENGINEER from NIT earn?

Комментарии
Автор

How did you get 0.45 for the section moment

adewaleabdulsalam
Автор

A transmission shaft is supported on two bearings which are 1m apart. Power is supplied to the shaft by means of a flexible coupling, which is located to the left of left hand bearing. Power is transmitted from the shaft by means of a belt pulley, 250 mm diameter, which is located at a distance of 300 mm from the left hand bearing. The mass of the pulley is 20 kg and the ratio of belt tension on tight and slack sides is 2:1. The belt tensions act vertically downward. The shaft is made of steel with yield stress 300N/mm2 and the factor of safety is 3. Determine the shaft diameter, if it transmits 10 kW power at 360 rpm from the coupling to the pulley.

yuktipatil