Quick Quickjack Wheel Mod No Drilling

A fast and easy way to add wheels to Quickjack so you can quickly slide it under the car.
Here is where I got the 1" Roller Ball Transfer Bearings:

Harbor Freight also sells them.

[YouMotorcycle]

Smart, efficient, effective, just great. Thank you.

[DSC]

Great idea! Harbor freight sells the wheels and also sells stainless steel zip ties that won't break.

[sportscarnut]

Very nice! I have been using swivel casters and your attachment of the ball rollers made me revise the way I thread the zip ties on the casters' base. I am now threading the zip tie between the casters' base and the QJ beam; this way the zip tie does not interfere with the swivel rotation.

[johnmead]

Thank you for this! I used this set up except fastened the smaller bearings with 3/16” aluminum rivets instead of zip ties, works great.

[bkell]

Great idea! Thanks for taking the time to explain this solution.

[MegaMajormax]

Thanks for posting this. I was looking for a no drill solution that would also not involve using the magnets to keep the center part attached to the rest of the body.

[texasaggieproud]

Great idea and video! I might experiment into using an adhesive or even a flat magnet to attach the rollers.

[bigdawg]

Did this to mine today, works great 👍 thanks for the idea and video

[maxsmiley]

nice tip. fwiw there are metal zip ties also.

[kebmedia]

Youre awesome! Going to be doing the same soon

[b.dalemagee]

I have tightened the zip ties as best I can, but any rash in the cement floor flips the castors to the side. Any thoughts to prevent them from moving?

[bryans]

Hello and thank you for the great video! What is the width of the mounting holes in these so I know what size zip tie to get?

[davidturk]

Can use heavy duty double sided tape in addition to zip ties.

[RbNetEngr]

So, the rollers on one end lift off the ground when the jack is raised, but what about the rollers on the other end of the jack?

[jcaputo]

when the bearing are secured in place and you have placed the jacks under the car will the jack move out of position in that they will move so easily prior to jacks lifting? When the jacks are raised could jacks move a bit in that the jacks are changing position slightly?

[ilyakol]

What size zip ties are these? They look beefy which is nice.

[TheDude]

How many inches does this add to the height when the jacks are fully down?

[Joe_Bader]

I like your method! How much height does this add when collapsed?

[Liberalunconformest]

Harbor freight has them for like 70 cents each