Husqvarna K 970 Ring

In this video we would like to show you the features and benefits of the K 970 Ring. We will show you how you can easily use the K 970 Ring in combination with a K 970 Chain to cut out a window in a block of reinforced concrete.

The K 970 Ring has a high cutting capacity, can make deep cuts from one side and is the quickest method for cutting small and medium-sized holes because no time is lost on installing rails.

[chrisjones]

This is one of the best innovations for cutting hard material they've come up with for anything over 5in. If you get good enough with one you don't even have to precut with anything else. Even if you can't cut a straight line with one try tapconing a 2 by 4 on your cut line and always let the ring saw do the bulk of the work. Don't push it.

[williamriley]

I cut concrete for a living the ring saw is great to save on the chain sawing but you don't chain saw the corners first. that's why your cuts not strait.  Ring saw then chainsaw the corners, gives you a cleaner cut great products but bad demo. try to cut the corners last and you can use the wall walker to keep your strait line. your welcome

[AlphatecEngineering]

Very cool tool, we have a couple of that ones!

[artemzlobin]

it seems that handsaw is not bad too... why to pay more?

[vandamparmo]

Good but when the rollers start wearing the blade keeps jumping out and it costs a small fortune to replace them..hire company's stopped hiring them out because of that problem..

[glekus]

What's the music? Maybe someone knows its name?

[kylerichardson]

Worst demo ever for starters U precut with a K1270 then U use wider precut blade the same thickness as your ring saw blade to save wear and then yes finish with the chain saw, if you don't precut before ring sawing bad kick back can occur which has killed operators they should put that in the brochure.

[ngaromatenga]

There's no sparks so no Steele so it's not reinforced concrete 😢

[xpainder]

try to do that in polish blocks from 1970's .. and book something about 5-8 hours for one window.. ;]

[justinweaver]

Cut backwards though, or lose your fronts x

[jessemaanen]

That is the most untidy cut i have ever seen, handsaw it first then ring saw, faster cleaner and tider

[biglousfoodreviews]

Definitely not the tool to start a cut with, they won’t hold up very long this way! I do this for a living and can tell you this for a fact! Otherwise great tool.