How to fix a broken key in a Euro cylinder lock

preview_player
Показать описание
A broken key in a euro cylinder lock can be a bit daunting at first but in many cases it is an easy fix. If you can remove the old broken key you can get another key cut, or if you can’t get the key out you can remove the euro cylinder for a like for like replacement. If you can’t remove the key or the euro cylinder this video also shows how to secure the door using a length of suitable timber. There are of course times when you have no choice but to call for a locksmith, but in most cases this video will help.
Рекомендации по теме
Комментарии
Автор

Thanks for this video - so helpful! I'm an absolute novice with no lock experience and your video saved me over £50 on a callout and labour...was able to remove the cylinder, go get an exact replacement and fit it very easily. Thanks a lot man 👍🏻

gheslop
Автор

Thank you for the video, brilliant!
Clear examples and instructions to understand.
Thank you once again

mikerbajaria
Автор

Good to see you didn't just drill the lock. So many locksmiths that are called out just drill peoples locks. Mainly because they know they can then make more money replacing the lock. Good locksmiths will pick them.

TheStevenWhiting
Автор

Thanks for this great video, I had very little experience with locks but managed to folloe your advice and put a drill bit in the other side of the lock and push the broken key out. This saved me so much time, hassle and money. Many Thanks Brett

bretthaywood
Автор

THANK YOU SO MUCH, you Legend! I turned it the lock using the snapped end I had as you demonstrated, and that allowed me to remove the bit stuck inside with the point of a Stanley knife and some pliers! 👍

EJGrant
Автор

Great video! I was able to remove a euro lock that someone had jammed the wrong key into. I was able to actuate the cam with a straight screwdriver (the lock was only a 60mm deep one, much shorter than the one in your video). Many thanks!

ChrisHow
Автор

By far best video on this subject. Thanks

jonwilmot
Автор

Key snapped at 9pm, couldn’t lock the front and we’re going on holiday tomorrow!

Life saver, cheers.

For info, the only thing that worked was lining up both sides of the lock and pushing a 1.5 Allen key through.

JOEMINNS
Автор

Thanks for this, very helpful and just saved us a locksmith callout. Thanks!

fubarfubar
Автор

The last tip about secureing the door handle was new to me. Simple and effective and much better than screwing in a door jam

jzzx
Автор

Many thanks to you for uploading this video, the cylinder in a door of the house was jammed and after watching your video I could break it. 👍👍👍

nedabagherichenari
Автор

Nice one for posting this had to do the snap option on our lock and was surprised how easy it broke all in all took less than ten minutes to remove and fit new lock

Msk-prqp
Автор

Excellent video Chez and that last tip about securing the door was superb, handy to use in all sorts of situations.

caskwith
Автор

Thanks man, just watched a few different vids on how to get this bloody key out..
Best one of the lot...

cartoonhead
Автор

Great vid. I have an anti snap lock… any ideas how to remove the barrel??

Tomru
Автор

Another great "how to" vid Chez. Hadn't thought of drilling a hole int he wood, I'd just tied it off in the past. Mind you, you could probably just leave the door open for a week here! I've managed to rescue the broken bit out of locks a couple of times using a dental probe. The sort with a straight piece with a little right angled bend on the end. The proper ones are strong. A pair of forceps can be useful as well, they're often sold as disgorgers for fishing . In some cases you can get them in to grip the thin sides of the key. Depends on the lock / key combination and how tight the key is though I guess.

davewhite
Автор

Thanks this is a brilliant tutorial, much appreciated.

wokeupandsmellthecoffee
Автор

If the screw holding the cylinder in place is rounded off do you recommend snapping the lock or drilling the screw out.Thanks

cragwards
Автор

Thanks for the tips I've had to use all sorts of measures to get doors locked temporarily! Also those ABS locks are fantastic but would be a pain if they snapped in the lock!

zedman
Автор

Great video and certainly one to remember!

pb
join shbcf.ru