Fuser500 Micro Casting System Complete Overview

Scott Bradford introduces you to the Fuser500™ micro casting system, a compact casting solution that offers high-end features and delivers dependable results. He guides you through setting up each machine and then demonstrates the entire process from making a mold to casting.

Check out the products used in this video:

00:00 Intro
00:34 Vacuum Setup
01:56 Temperature Controller on Kiln
03:43 Wax Injector Setup
05:43 Complete setup
05:52 How to set up the Flask
08:55 Preparing for Investment
11:57 After Investment
12:53 Loading Flask into Kiln
13:50 Programming Kiln Controller
15:11 Casting
18:28 RTV Mold
19:35 Mixing for Mold
22:45 Take Apart the Mold
23:55 Wax Injector Process
26:30 Vacuum Wax Injecting
29:03 Outro

Rio Grande stands for makers who create with their hands and their hearts and who are courageous enough to make jewelry their livelihood.

Connect with Rio Online:

[crli]

As someone who has been casting for decades, save yourself the time and trouble and save for a traditional casting set up. Yes its more expensive, but, all the little tubes, hoses and attachments on this thing will certainly get lost and lets not forget there was no illustration how to clean the parts of this after use, particular the investment phase with the flippy maneuver and balancing act. I have used the RTV mold making method and it works, but air bubbles will always be a problem because you cant pull a vacuum on the mold. Pennywise pound foolish

[elkskiutah]

All the previous comments seem relevant. But it is kinda cool. Can it be purchased without the wax pot for one of a kind work?
I would like to see real investment used and the mess that i envisioned as you disassemble things. Seems like you really want to clean any crumbs out of that hand carved funnel.

[johndo]

Far to many bits and pieces far to time consuming for a busy workshop .

[antonioloy]

Ok great video for amateur casters ..please give me a break!!how muchnfor this system??I hope that any new caster or Goldsmith stear away from this ...I cannot believe it...what happened to learning by mistakes and hard workband cheaper equipment!!the last prep was so.laje and time consuming...OMG!!I am sure that this item isn't going to be a best seller!!😂😂

[FatKidBrody]

As with anything that is at Rio you know this isn't going to have a cheap price tag.

[danieldetagle]

Yes, this is too elaborate and time consuming for the regular and busy work shop, I fell asleep mid video, who came up with this set up?

[rushabhsoni]

He could make it single long chamber. Like CIMO investment mixer . What an over engineered product

[archkittens]

The bit that killed me is "Cut out a funnel with an xacto knife" yikes