How to change front suspension arm / control arm on VW POLO 5 Saloon [TUTORIAL AUTODOC]

How to change front suspension arm / control arm on VW POLO 5 (612) 1.6 Saloon 2009–present [TUTORIAL AUTODOC]

Suspension arm on AUDI A1 Hatchback (8X1, 8XK) (05.2010–...) / SEAT Ibiza IV Hatchback (6J5, 6P1) (03.2008–...) / SEAT Toledo IV Hatchback (KG3) (07.2012–...) / VW Polo V Hatchback (6R1, 6C1) (03.2009–...) / SKODA Fabia III Hatchback (NJ3) (08.2014–...) cars should be replaced, as a rule, according to one and the same procedure.
However, there can be slight differences due to specific features of the vehicle design.

🔝 Top brands that produce suspension arm: RIDEX; STARK; FEBI BILSTEIN; LEMFÖRDER; MOOG

📲 Buying via app is always cheaper than on the website!



🛠️The tools you need to replace front suspension arm:
- wire brush
- WD-40 spray
- brake cleaner
- copper grease
- combination spanner no. 18
- drive socket no. 16
- drive socket no. 18
- wheel impact socket no.17
- ratchet wrench
- torque wrench
- tap wrench
- crow bar
- rubber mallet
- hydraulic transmission jack
- wheel chock

Was this video helpful? Give it a thumbs-up and share it with your friends!

Have a look at other videos on our channel:

📢 AUTODOC on social media:

#autodoc #autodoctutorial #autodoctips

Disclaimer:
This video is intended for informational purposes only and does not guarantee achievement of a specific result.

It is recommended that you entrust the installation to highly skilled technicians to ensure the best result.

This video is intended for informational purposes only and does not guarantee achievement of a specific result. It is recommended that you entrust the installation to highly skilled technicians to ensure the best result. This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements that are a result of incorrect use or misinterpretation of the provided information. The user is personally liable for incorrect use of repair equipment, tools, or car parts, in particular when this use poses the risk of injury. AUTODOC strongly recommends taking appropriate safety precautions when carrying out any repair or replacement. Keep in mind that low-quality auto parts may not provide the appropriate level of road safety.

© 2020 AUTODOC GmbH All rights reserved

[philpots]

Very helpful video, im about to switch out mine and cant find any info on oem manufacturer, can you help at all.

[sourabhdhawan]

Does worn out bushes or swing arm causes negative camber issues.?

[themilkmister]

Do you need to lift up the suspension arm to do this job?

[kenkennedy]

Do I need to get the tracking checked after fitting?

[wernerhattingh]

Wheel bolts should be torqued by hand and not impact wrench tighten. Have a flat road side and only hand tools you have very hard time get bolts loose

[legolash]

Is this vehicle similar to vento, we have in india?

[ianmason]

On a UK 1.2 polo mk5, when trying to remove the front bolt it fouls on the sump, How can i get it out ?