filmov
tv
Axe Restoration [Satin Axe Head With Walnut Handle]
Показать описание
Remove rust with cola? That's supposed to work? In this restoration of this extremely rusty old axe I will try... But of course I will also restore the complete axe, that means I will harden, quench in oil and water, file, grind, polish, cut with the band saw and saws and more. It will definitely be hot because it burns, but also very cold when you quench it.
▶ What did I do ?! ◀
I remove the coarse rust with a wire brush, then soak the extremely rusty axe head in cola and try to remove the remaining rust. I work on the contour with a belt grinder, an angle grinder and files. The axe head is then heated to 800°C/1472°F and quenched in 80°C/176°F oil. I then sanded the surface with sandpaper up to a grain size of 800. I made a new handle from walnut wood as the old one was no longer available. Now just rub the handle with linseed oil and hammer in the old wedges, and the new old axe is finished.
▶ Good to know ◀
I used the following tools: Wire brush, cordless screwdriver, drill, Bunsen burner, pin punch, hammer, brush, file, angle grinder, cut-off wheel, belt sander, hardening oven, oil, immersion heater, forging pliers, thermometer, oven, water, spatula, orbital sander, sanding fleece, polishing block, polishing paste, adhesive tape, pencil, knife, tweezers, band saw, calipers, sandpaper, saw, whetstone, linseed oil varnish
▶ Special thanks to my channel members! ◀
⭐Fred Chipps
▶ Do you want to support me? ◀
Would you like to become a channel member? Then you can do it here:
You like what you see and you want to help the channel to develop continuously? If you want to support me you can donate via Paypal:
or use the following affiliate links:
Material for work:
Equipment:
Affiliate links don't cost you anything, I just get a small share from the seller, you have no disadvantage from it.
▶ Did you like it? ◀
Did you like the video?
Then like, subscribe and share it, please!
Thanks a lot!
▶ What did I do ?! ◀
I remove the coarse rust with a wire brush, then soak the extremely rusty axe head in cola and try to remove the remaining rust. I work on the contour with a belt grinder, an angle grinder and files. The axe head is then heated to 800°C/1472°F and quenched in 80°C/176°F oil. I then sanded the surface with sandpaper up to a grain size of 800. I made a new handle from walnut wood as the old one was no longer available. Now just rub the handle with linseed oil and hammer in the old wedges, and the new old axe is finished.
▶ Good to know ◀
I used the following tools: Wire brush, cordless screwdriver, drill, Bunsen burner, pin punch, hammer, brush, file, angle grinder, cut-off wheel, belt sander, hardening oven, oil, immersion heater, forging pliers, thermometer, oven, water, spatula, orbital sander, sanding fleece, polishing block, polishing paste, adhesive tape, pencil, knife, tweezers, band saw, calipers, sandpaper, saw, whetstone, linseed oil varnish
▶ Special thanks to my channel members! ◀
⭐Fred Chipps
▶ Do you want to support me? ◀
Would you like to become a channel member? Then you can do it here:
You like what you see and you want to help the channel to develop continuously? If you want to support me you can donate via Paypal:
or use the following affiliate links:
Material for work:
Equipment:
Affiliate links don't cost you anything, I just get a small share from the seller, you have no disadvantage from it.
▶ Did you like it? ◀
Did you like the video?
Then like, subscribe and share it, please!
Thanks a lot!
0:14:02
Axe Restoration [Satin Axe Head With Walnut Handle]
0:19:37
Rusty Axe Restoration. FarmCraft101
0:11:56
Axe Restoration - Electrolysis Results and Finish | 3 B4Time
0:17:26
RESTORING an old TWO BIT axe. UNIQUE process
0:14:08
Fire Axe Restoration Challenge
0:13:23
Make Custom Handles for Your Tools! (Ax and Hammer Restoration)
0:08:47
EASY SIMPLE DIY Axe Restoration | Working with HD
0:18:42
Restoring a Plumb Axe pt 2 - The Axe is Back
0:13:04
Rusty axe head restoration. Stranger Things inspired perfect restoration
0:16:40
Old Hatchet New Handle - Norlund / Hudson Bay Axe Restoration With Custom Hickory Handle
0:02:26
Vintage Axe Works Restoration Completion - Keen Kutter on a 20' Handle
0:05:35
CUSTOM AXE BUILD - Part 3 - Hand Finishing
0:11:06
Making an octagon handle for my pack axe
0:23:03
Norlund Axe Restoration - Custom Laminated Handle
1:01:29
Old BSA Plumb Hatchet Restoration. Using Fire to protect the wooden handle🔥
0:17:15
Fitting an axe handle
0:23:57
restoring a VINTAGE 1960s hatchet
0:01:43
Andy Spoons and Walrus Oil | Axe Oil
0:14:13
I made a Norlund Voyager Axe
0:15:25
DIY TOTAL AXE MAKEOVER!!! Condor Scout Hatchet Gets Shiny New Convex Grind!
0:16:34
Making The Hudson Bay Axe 2.0 - Part 2
0:11:22
How to Make a Bearded Hatchet from a Carpenters Axe 🪓
0:03:13
Harbor Freight Axe Mod Update
0:06:25
Vintage Axe Giveaway!
Комментарии