Front Sway Bar Bushing Noise - 2012 Jeep Wrangler JK

Temporary fix - I used white lithium grease
Permanent fix - change them
(This is on my Jeep Wrangler, where it's easy to see and hear)

[jabez]

My god! I have been checking my shock absorbers, coil springs, all the joints, etc.. still couldn't figure out what that squeaky noise was. Coming from both front and rear especially when going over bumps!

Now I know who's the culprit! Thanks for the video!

[Fadhilabdulghani]

The early morning car chatter. sound that haunts me for so long despite replacing numerous parts until i've watched your video. It usually occurs during cold mornings and gradually fades as the car warms up. Thanks a million much sir !

[priekslietam]

Finnally i found the solution of my problem! Thanks a lot!

[FIRST]

Thank you! I found out where my noise came from xD

[jalee]

The bushings still looks good and tight but the rubber needs some grease. If you car cruches creaks on acceleration and braking look into lubing the sway bar bushings.

[jjenson]

Those bushings don't look bad at all. They're not loose or worn out; they're just lacking lubrication. You should see the ones I took off of my car. The bar was bouncing around inside the bushing.

[jakeacuff]

this video is hilarious! But good. lol..short and sweet. thanks for getting to the point!

[aleksandararsenijevic]

Thank you, i have corolla E9 from 1988 and have same sound, tomorow is day D

[GeorgeAusters]

Thank you... I hope this fixes my problem

[AhmadAli-dufq]

Dammit wish you had what it sounded like from inside the car i dont know if it’s the same sound

[decisions]

For the sway bar bushings can it make that sound when turning? Have a similar noise but when turning wheel

[vincentiiramirez]

this is the sound im looking for is this called stabilizer bar bushing also?

[thehegt]

That’s sound like a Bad struts but turn out to be the Bushing ?

[Fadhilabdulghani]

However i've just found out that Lithium grease is not suitable for rubber because it is petroleum-based.The petroleum content can cause rubber to degrade, swell, or become brittle over time. This degradation can lead to premature failure of rubber components, making lithium grease a poor choice for applications involving rubber parts.

[RobeeBarrera]

This is exactly the noise I hear over speed bumps. Only in cold weather though. I hope this is the problem

[Genners]

Same issue here, driving me bonkers! Only a $9 part though :-)

[jaredthisdelle]

I spray down 20 year old cars sound even worse after spray nothing just dry bushings need lube sometimes

[jaredthisdelle]

Gm right .just spray the shot out of it with silicone lithium grease c.t less then ten bucks do all bushings never hear it again

[superstuv]

Take off bushings, wrap sway bar with Teflon tape, grease bushings and reinstall. Squeak gone.

[timkupchenko]

Your end links on the sway bar are bad, I had the same problem over bumps and i figured it out it was my drivers side rear end link bushings, the dealer replaced them with my warranty for free and no more noise over uneven roads. This is on my 2012 mustang 3.7