ESi Controls RTP4/RF Pairing the Reciever

How to pair the RTP4RF thermostat to the Receiver

[diw]

Just wanted to leave a quick update since my recent comments. For those who mentioned their green light stayed on continously therefore when trying the steps in this video wasn't working. I managed to figure a way of solving this and should've thought about doing this sooner. Just turn off the boiler completely from the mains electrical socket. Switch the boiler back on after 15 seconds. You will notice both green and red lights on the receiver turn off. Then position the slider on the thermostat to off and follow the steps in this video. The receiver and thermostat should now sync. Hope this helps.

[godman]

Thank you so much I wasn't holding the buttons down long enough I've been at it for 3 hours looked at other videos they did not explain this at all. Even the instructions The device came with don't make this clear. Thank you again Brilliant

[PhyllisGlassupTheBrim]

You've saved me money. I thought my boiler was broken and all along the ESi thing had become unpaired. I followed your instructions and hey presto, I have heat again woohoo. A million thanks.

[sabine]

My heating wasn't working using the thermostat, this was so helpful - thank you

[louisenicholas]

I followed your tip about turning off as mine was not pairing, it still didn't work so I change batteries and it worked straight away, thanks x

[ahadulislam]

Freakin awesome! Thanks so much, my installers couldn't pair it and got different gas engineers to have a look too and they failed. This worked!! Thanks again

[gworld]

Clear, concise. Saved me calling someone in. You are perfect at what you do!

[rlm]

Brilliant video. Always makes it easy when you can actually see how it's done 👍

[astorbusinesscenters]

If both lights are on as it was in my case, turn off the boiler completely. Switch the boiler back on after 20 seconds. You will notice both green and red lights on the receiver turn off. Then position the slider on the thermostat to off and follow the steps in this video. The receiver and thermostat should now sync. Hope this helps.

[karlblythe]

Excellent video...not a clue about these things but this sorted me out.

[valkythealky]

This happens to us several times a year so thank you

[baileysmyman]

Thanks for this, very handy and straight forward explainaction.

[DrKhaledAhmed-dd]

Thank you so much! It worked and saved me a call out charge

[nicolaridley]

Fantastic, have gone months without it connecting

[renansilvaoliveira]

Fantástic vídeo 🎉, thank tou very much

[waynegrow]

Thanks for video. My batteries needed changing.

[ChrisR_]

thanks for this as I forgot how to re-pair ours and can't seem anywhere in booklet on how to pair cheers

[mehmetkorkmaz]

My green light keeps flashing while pressing A H + buttons. İt won’t turn off. The antenna sign is also showing without the circle and line

[shockz]

Thanks for this. My controller became unpaired after I failed to replace the low batteries in it and they eventually died. This sorted it out in seconds. 👍

Note to self: next time just change the batteries.

[trotterstips]

This worked perfectly . Thanks so much