3v to 12v step-up dc converter - mt3608 boost converter module

Hi guys today i am going to show how to convert 3v to 12v dc
with the mt3608 boost converter module.

Input volt for the module is 2v - 24v
max output 27v

Please like and share this video😀
==================================================

HELP ME GET 10,000 SUBSCRIBERS

==================================================
CHECK OUT OTHER VIDEOS:👀

==================================================

title: 3v to 12v step-up dc converter - mt3608 boost converter
tags:boost converter,dc to dc converter,how to make,how to make 3v to 12v,3v to 12v converter,voltage booster,electronics,simple boost converter,Voltage Booster Circuit,simple boost circuit,boost converter,buck converter,diy,step up converter,power supply,step down converter,boost,dc,step-up,supply,power,adjustable,regulator,module,3-34v,power bank circuit,variable,review,buck boost,mt3608,module,mt3608 boost converter,buck converter,step up converter,mt3608

#voltage
#hacks

[delich]

Can i use the 9V battery that u buy in the shop or it is important to have lithium battery

[shemeerababu]

I couldn't vary the output voltage under no load the voltage remains same as the input. What's the issue?.The input I connected is power bank.

[jobert]

How many hour you test the module using led strips l?

[johnanderson]

Constant Current....? It's nice to see you hooking it up to something that needs 5A, but without constant current adjustment, LEDs and such will draw maximum power and burn out the LEDs. Good for Fans, but not good for LEDs or charging batteries.

[KrishnaKrishna-utot]

Sir mai Lm2596 module order kiya hu mai strip light chalana cahta hu kya ye isse jalega please btaiye mai 8v 3amp ka input dunga kya ye chalega please btaiye

[RaghavChoudhary]

But voltage drop of battery will be very fast this is the big advantage

[jobert]

The chips to hot if you load LED strips

[nvd]

What is the max input and output current it can take?

[rehanshayaan]

Bhayya good morning.
Can I connect MT3608 boost converter to output of TP4056 while it is charging an 18650 battery?
Please reply

[jccabrera]

How many hour it work by one batty cell

[arya_x]

Hello how long will it last for 12v output?

[yankozlatanov]

Spoiler alert! This boost module is for very low power loads unless you like to burn it out. Its greed for boosting 3.7volts lithium battery to 5volts 1amp like usb power bank but 12volts cannot give much current output /maybe 200-300 mA/. I used bunches of those and the results are disappointing at higher than 5 to 9 volts. Just look at the controll chip. Do you really expect much of 2x2mm chip with build in switch?

[gayanx]

Your battery will get over discharged.