How to Use the FormLabs 3B SLA Printer

This video covers how the printer works, using the software, the resins available at MakeHaven, and the Wash and Cure Stations.

LINKS:

[jinhoonchung]

🎯 Key Takeaways for quick navigation:

00:00 🖨️ *Introduction to FormLabs 3B 3D Printer*
- FormLabs 3B is an SLA printer that uses resin.
- Components of the system include the printer, wash bin, and curing station.
- Resin printing offers high detail and is suitable for various applications.
01:27 📄 *Resin Printing Materials*
- FormLabs 3B uses various resin materials, including tough, white, and high temp.
- Each material requires a dedicated tray and careful storage.
- Resin printing allows for the creation of high-quality, detailed prints.
03:48 🖼️ *Resin Printing Process*
- Resin printing involves printing upside down and using lasers to harden resin layers.
- Proper platform and material storage is essential.
- Isopropyl alcohol is used in the wash bin for post-print cleaning.
06:12 ⚠️ *Isopropyl Alcohol Handling*
- Isopropyl alcohol used in the wash bin should be fresh and at the correct level.
- It's important to keep the wash bin closed due to alcohol evaporation and flammability.
- Regularly check and maintain the isopropyl alcohol level.
08:15 🛠️ *Removing Printed Parts and Support*
- Printed parts can be removed from the wash bin.
- Use side snips to remove support structures.
- Be cautious while handling delicate printed parts.
10:23 🔄 *Changing Printing Materials*
- Changing resin materials involves replacing the resin tank.
- Ensure the cap on the resin tank is loose to allow resin flow.
- Store materials and platforms appropriately.
13:30 🔧 *Leveling the Printer*
- The printer may require leveling using leveling discs under its feet.
- Follow the interface's guidance to adjust the printer's feet for proper leveling.
14:30 🖥️ *Using PreForm Software*
- PreForm software is used for FormLabs 3B printer.
- Proper orientation of the 3D model is crucial to avoid printing directly on the build platform.
- Settings like raft, density, and supports need to be adjusted based on the print requirements.
- Resin type and resolution settings should match the material used and desired print quality.
20:54 💡 *Printing Considerations*
- Consider the volume of resin required for your print.
- Resin volume can impact the cost of the 3D print.
- Resolution settings can affect both print quality and printing time.
21:23 🖨️ *Printing Recommendations*
- Printability factors such as cost per milliliter, supports, and cups,
- Tips for successful printing, including tilting pieces, reducing overhangs, and avoiding suction cups.
26:44 📤 *Uploading and Starting Print*
- Steps for uploading a print job to the printer,
- Confirming necessary precautions like the vent cap and handle being locked down.
27:10 🧼 *Washing and Post-Print Handling*
- Placing the printed object in the washing basin,
- Initiating the washing process and ensuring the cap is closed,
- Drying the print and preparing for support removal and curing.

Made with HARPA AI

[rebeccabrim]

This video is exactly what I needed! Thank you!

[artcreationstudio]

You guys are AWESOME ...Ive been looking for a video explaining everything you got in this video EXCELLENT!!! Thsnk!

[MadelinePenelopeCapital]

Great video guys! I’m starting a new job this week and I’ll be using one of these badboyz so I greatly appreciate the content ✌🏽

[cristiancassanelli]

Hi guys great video. I have a question: until recently I had the first formlabs printer and by going into the settings from the software via PC or directly into the printer settings from the touchscreen, I could set the printer in open mode...by disabling the resin temperature sensor and the tray refill sensor. Is it possible to do the same with the 3B and 3B+ I just bought? Thanks for the reply

[shy]

So far using formlabs Form 3
Do you think it is still easy to use? Or recommend new machines from other brands
I want to buy one recently, but this is the old technology of the previous two years.
Printer technology is always changing, still considering...
Is there a recommended discussion platform?

[tanosinde]

Question… is it ok to leave resin tank in the printer even if you do not use the printer soon??

[glendooer]

Can you do a Vid on printing Dentures??

[precisdrndmanufacturing]

Hey, a quick question: Where did you get/make the tool holder for the formlabs which is mounted to the wall. I really like your setup there *thumbs up

[limonmahmud]

Can anyone please tell me the approximate cost of printer

[remy-]

A cotton mouthmask doesn’t help. Nitrile gloves do…

[eremitamatos]

Sim entendi verdade nao e minha o Ape consulta vamos conversar ok

[bishopbling-bling]

I hate this overpriced pos printer, nothing but constant print failures