US AXLE ALLOWANCES WITH PERMITS

Two maps that show maximum axle weights of 2- and 3-axle setup available with a permit.

[HHTV]

Glad to be able to help. Our LS website has lots of great info on heavy haul. I'm checking things out there all the time.

[HHTV]

Three axle trailers allow you to haul more weight INSIDE CANADA. Canada does not have the 80, 000 lb Gross Weight limit, as the US does. The more axles you have in Canada, the more weight you can haul LEGALLY.

[AvocadoCotijaCheeseConnoisseur]

Wow, interesting and helpful video from 7 years ago. You’ve come such a long way.

[HHTV]

That's what the SECOND MAP shows: axle weights for TRIDEM axle groups. Mind you: these are maximum weights you can get with a overweight permit. The legal load depending on the axle spacing is between 43, 500 lbs to 45, 000 lbs for all three axles. That's 19, 770 KG and 20, 450 KG respectively.

[ponycarfan]

I was always wondering these things. Thanks a TONE for posting this!!!!

[Seriousmods]

Thank you very much. I always like to learn.

[HHTV]

It's a private web site. You have to be a Landstar BCO (trucker) or Agent to log in.

[DEMOGUY]

I always start with 12k on my steer, but most states will allow 14k. You could still do it, however your a little light on the tridem RGN, they are closer to 20k. It would be close, but depending on the states you want to go into you could scale it. Excavators are real easy to haul & scale. That's why people haul them really cheap. In your situation, I would plan on not hauling anything over 70k as a general rule. If you have the room you could look at putting a third axle on your truck...

[DEMOGUY]

A lot of those axle weights on the map are incorrect. For example, you can have 44k on trailer tandems in FL, with out a permit. The map said 40k with permit. WV will allow 60k on tridem, not 52k. II do heavy haul up to 11 axles.

[DEMOGUY]

It depends on what states your hauling in, but you should not have any trouble scaling that excavator with a 1+2+3 configuration. That would basically be your truck with a tri axle RGN. I don't know what your truck weighs, or what trailer you might haul. When I'm looking at a load, just for a quick idea, I figure 12k on my steer, 60k on my truck tridem (40k in your case) and 60k on my trailer tridem.

[HHTV]

Well, I"m in Canada and it's supposed to be on metric too but since we deal with USA all the time as truckers we use pounds and feet a lot. I spent 35 years in Russia using MM, CM, M and KG and then I became a long haul trucker in Canada ;) Now I'm 'bilingual'.

[DEMOGUY]

I have a KW W900L with a 55ton Fontaine 3 axle hydro RGN, I weigh 45k empty with 300gal of fuel. I can scale 85k all day long on 7 axles.

[HHTV]

I want to get into RGN/DD freight, 2 axle trailers to start, nothing too heavy. Can you tell me what kind of trailer you need to haul a 75, 000 lb excavator? 3 axles or 4? My truck has regular 12+40. Thx.

[HHTV]

My truck is just an average fleet truck, 235" wheelbase. I'm thinking if I can get into RGNs I could later change into a truck with heavier axles and longer wheelbase but n Canada you can't go over 244".

[djdjerojr]

What about a threeaxle? Isn't there just a maximum axle load? So per axle, like in Europe, and a total maximum weight for the whole combination.

[mansingh]

I want to know how much weight can 4 axel tanker trailer can haul from Quebec to USA NY

[DEMOGUY]

I normally run a 7 axle RGN. I can get 60k on my tridems 90% of the time. I can gross 132k on 7 axles just about anywhere except for MO. I am an approved carrier for Landstar and haul quite a bit for them. Are you thinking of going to heavy haul?

[HHTV]

I thought that excavator might be pulled off with a tridem RGN. My truck only weighs 20.5K plus - let's say - 18K for a tri-axle RGN. That's 38.5K. Max permit load: 12+40+60 =112K. 112K minus 38.5 = 73.5K Darn - I'd be 1, 500 lbs short ;) That's where the 46k drives on the truck would come in handy ;)

[aoolboy]

Hey did you need a new license for car and truck when you moved in canada?

[Seriousmods]

Could you DM me a link? I don't see it on your profile. Thanks.