Audi Q7 Air Suspension Calibration/Adaptation

preview_player
Показать описание
After trying to do calibration on this car , we found out that the vehicle has some DTC in the fault memory ( 34 - Level Control ) .The fault was : 00776 Level Control System Sensor; Front Left (G78) . We needed to fix the problem , before continuing the calibration process .

CRANK
Рекомендации по теме
Комментарии
Автор

Чудесно видео ! Би било прекрасно ако го направите и на български. Не че няма да се оправим и на английски но, по ми се искаше да е на роден език. Благодаря!

marinkassakov
Автор

*hello my Audi Q7 is very raised on the right side and crushed on the left side I can not calibrate it it always remains in the air I have so much value that I do not know what to enter do you have any idea how can we put it back to the factory?*

LeTRANSPORTEUR
Автор

Is there a way to find out the exact problem with the Air suspension in Audi Q7 2010

iga
Автор

Hi thanks for this info, question, I have audi a7 2013 and it has the driver side highest then passenger side, how I can fix it please?

sarmadalqaysi
Автор

You must check and bars on the tayres same.

bussmils
Автор

Hi is suspension on LIFT mode when you measuring?

jakubluszczak
Автор

Just followed the same sequence but channel 5 says error.. what to do next ?!

thaUnit
Автор

Hy there.. i have a 2008 Q7 4L LHD and i have a problem. I left the car on offroad mode and the next day i found it with the rear up (still on offroad) and the front down with the driver side even lower than the pax side (unbalanced). I started the car..started to raise up automatical and it drove fine... At night i left it in dynamic mode.. the next morning again the same isue..the rear was ok at the setting i left the car, but the front again with the same problem. The front lower than the rear and the driver side even lower!

vladleonard
Автор

Is the security code the same for all cars, or how would I find the right code for my car? It's an A6 Allroad C6

PVflying
Автор

Will this be the same steps for one one wheel is higher than rest? I get no codes but top right is higher then left one. All others are good.

mendezify
Автор

hello. the procedure is the same, with an Allroad 4F?

Guille
Автор

Security acces code engine module 01 For Q7 4L 3.0 tdi (BUG) 2006?

Jose.G_BJJ-MMA
Автор

Ostia ojalá estuviese traducido llevo 1 año peleando con la suspensión neumatica de mi touareg y no hay forma

javiervidal
visit shbcf.ru