SRAM Road AXS | How to: Center Brake Calipers

If your brake rotor is rubbing, it may require centering.

1. Use a T25 Torx wrench.
2. Loosen the caliper bolts with a T25 Torx Wrench.
3. Lightly squeeze the brake lever 3 times to advance the brake pads to the rotor.
4. Then hold the lever to center the caliper on the rotor.
5. Tighten the caliper bolts to 5Nm
6. Check that the brake pads are equally spaced on either side of the rotor.
7. Repeat the process and adjust the caliper by hand to center if necessary.

Subscribe to the SRAM channel → @SRAM

[lowballa]

Soooo…. Loosen caliper…squeeze the brake lever a few times, tighten caliper. Got it.

[RAPEVERMRC]

The flat mount bolts from SRAM are so easy to ruin. All bits I have tried cannot protrude deep enough into the bolt to grip it tightly.

Which bits do you recommend?

[shinobusensui]

Can you update the mechanical doubletap video?? how to shift both rear and front and how to go back 2 gears in the back.

[toddlong]

I call this out as not a real world scenario. First thing, take the wheel out and check the rotor to make sure it is tightened. Then, put the wheel in a truing stand with a rotor alignment tool and make sure the rotor is true. Then start making your adjustments on the caliper by eye sight or squeezing the lever and tightening the mounting screws and making the adjustments.

[FliskerX]

lol showing torque wrench and not saying what's the torque...