He Was Haunted Till He Confessed fr...😲

In 1990, a man named Juan Pedro Martinez walked into a police station and confessed to murder—years after committing it. Why? Because he claimed the ghost of his victim haunted him every night, whispering, “I know what you did.” He heard footsteps, saw objects move, and couldn’t sleep. The torment got so bad that he gave up and admitted everything. When police checked, the body was exactly where he said. Was it guilt messing with his mind or a real ghost seeking justice?
#unseenmyth #wojakstories #real

[JackMMeme]

Explanation:

In 1990, a man named Juan Pedro Martinez walked into a police station and confessed to murder—years after committing it. Why? Because he claimed the ghost of his victim haunted him every night, whispering, “I know what you did.” He heard footsteps, saw objects move, and couldn’t sleep. The torment got so bad that he gave up and admitted everything. When police checked, the body was exactly where he said. Was it guilt messing with his mind or a real ghost seeking justice?

[provash]

Bro Literally said
"If Karma doesn't hit you I WILL!"☠️💀

[BIGvincible]

"What do you know?"

Victim: *Mf you are literally the one that killed me*

[Jurian]

You know its scary when the murderer asks to be locked up before he gets killed.

[manasipanda]

Bro got instant trauma without knowing the truth

[frank_rocky_fiegel]

Passing on is a choice but remaining is a curse. Remember that when your time comes!

[Aaraway]

Yt during the day :😂✨
Yt after 1.30 a.m : 💀💢

[mobilelegendsedits]

The shorts popping out when its time to bed..
"I know what you did"

[Totoro-ggf]

Damn I always get this kind of shorts before going to bed!!

[Skele__boi]

This is cool, anyway, here's how to build a particle accelerator:

1. Get a Particle Source: To start, you need a source of charged particles. Protons are a common choice, and they can be created by stripping electrons from hydrogen atoms, leaving positively charged protons behind. Alternatively, you could use electrons, which can be generated using a simple cathode or electron gun. The type of particle you choose depends on the kind of experiments or applications you have in mind.


2. Build a Vacuum Chamber: The particle accelerator needs a vacuum environment for particles to travel without hitting air molecules. Even small interactions with air can slow the particles down or knock them off course. To create this, build a long, sealed metal tube and use vacuum pumps to remove as much air as possible, achieving near-vacuum conditions. This tube is where the particles will travel during acceleration.


3. Install Electromagnets for Steering and Focusing: Charged particles don’t naturally travel in straight lines, so electromagnets are used to steer and focus the particle beam. Wrap copper wire into coils (solenoids) or use specialized electromagnets around sections of the vacuum chamber. These magnets will bend and direct the particles, especially in circular or curved accelerators like a cyclotron or synchrotron. The magnets also focus the beam so it doesn't spread out as it travels.


4. Add RF Cavities for Acceleration: The particles need to be accelerated to near the speed of light for many experiments. This is done using radio frequency (RF) cavities, which create oscillating electric fields. As particles pass through each cavity, the field gives them an extra "kick" of energy, speeding them up. You need to set up multiple RF cavities along the vacuum tube if you’re building a linear accelerator, or place them strategically in circular designs like synchrotrons to increase the particles’ energy with every lap.


5. Set Up a High-Voltage Power Supply: To power the RF cavities and electromagnets, you’ll need a high-voltage power supply. It must be carefully controlled and synchronized to ensure that the RF fields accelerate the particles at the right time, and that the electromagnets are properly tuned to guide them. Depending on the scale of your accelerator, the power requirements could be substantial.


6. Install Detectors to Measure Particles: Once the particles are moving at high speeds, you’ll want to monitor their behavior, especially if you're aiming for collisions. Detectors are placed around the end of the accelerator or at key points where the particle beam will interact with targets. These detectors can measure things like particle energy, trajectories, or the results of particle collisions if you’re performing experiments.


7. Add Cooling Systems: If your accelerator is large or uses superconducting magnets, you’ll need cooling systems, such as liquid helium, to keep the magnets at cryogenic temperatures. Superconductors lose all electrical resistance at these temperatures, allowing for extremely efficient and powerful magnets. Even if your setup doesn’t require superconductors, cooling may be necessary to prevent overheating in the RF cavities and electromagnets.


8. Set Up a Computer-Controlled System: Since many aspects of the accelerator need precise timing and synchronization, you’ll need a computer to control the RF cavities, power supply, and magnets. The system will automatically adjust the power and electromagnetic fields in real-time to ensure the particles remain on track and accelerate smoothly. This computer also collects data from the detectors and can adjust the experiment based on results.


9. Test and Calibrate the System: Once everything is in place, it’s time to test the accelerator. Initially, you’ll fire low-energy particles through the system to check if the vacuum, magnets, and RF cavities are working correctly. You may need to tweak the alignment of the magnets and fine-tune the power settings to ensure the particle beam accelerates efficiently. During this stage, data from the detectors will help you see if the particles are reaching the expected speeds.


10. Run Experiments or Particle Collisions: Once the accelerator is fully functional, you can start running experiments. In a particle collider, for example, you can direct two particle beams to collide at extremely high speeds, creating conditions similar to those just after the Big Bang. The detectors will capture the resulting particles and interactions, allowing you to study fundamental physics. If you’re not colliding particles, you can still study their behavior at high speeds or use them to hit a specific target.

[Unknown--im]

Me watching it at 11:39 🤧

"I ain't gonna sleep at night"

[RickeyBrice]

Bro iam watching this at night i will have nightmares😢😢

[ACurraj]

I said last short before bed and this is that pops up

[azmipratama]

The victim last word be like:"I ALWAYS COME BACK"💀💀

[JbGarcia-ey]

Damn human back then is crazy but true story at the same time😢

[jugalsarkar]

The image you sent shows a meme featuring a character called "Monke." It's a dark humor meme with the text "YOU KILLED ME..." and a sad-looking Monke.
Here's a breakdown of the elements:
* Monke: A popular character in online communities, often depicted in various poses and scenarios. It's associated with humor, often dark or surreal.
* "YOU KILLED ME...": This text creates a sense of drama and exaggeration. It's likely a reference to something the Monke is reacting to, but it's left open to interpretation.
* Dark Humor: The combination of the Monke's sad expression and the dramatic text creates a sense of dark humor. It's a way to find humor in something that might be considered serious or morbid.
The meme's meaning is open to interpretation. It could be a reaction to a specific event, a general expression of frustration or sadness, or simply a way to create dark humor. The context in which the meme is shared often helps to clarify its meaning.

[annguyenkhai]

Obsession pulling
Here i come to take whats mineeee 🗣🗣🗣

[Josè-x]

Idc about this its 2:05 am right now and i heard my neighbours clapping idk what they are doing im a kid

[Tanjiro-]

Bro stop the red eyes scares me more- 😭

[psy.]

These shorts... Always before bed time 😑