How To Make a Stepper Motor Speed Controller using Arduino and L298 Motor Driver

In this innovative tutorial, titled "Crafting a Stepper Motor Speed Controller using Arduino and L298 Motor Driver" by Mohammad Ansar Robotics, you'll explore a creative approach to controlling stepper motor speed. Unlock the potential of this inventive project and be sure to subscribe and like the video to encourage further innovation in the robotics community!

Components Details () {
}

We regularly uploads exciting videos like this
Suscribe us For More Videos

Muhammad Ansar
[phone]

[abscalia_liuteria-restauro]

I replaced your project for a photoslider: perfect. Everything is working. And I'm not an electrotechnical. Tank you!

[kusmanf]

Brother, it is a very good video with excellent descriptive link for schematic and code. Thank you very much for uploading a such a good project. I would like to know if you want to have only two buttons to change the direction without a middle stop button, how would you change the code? What I mean is while you press one button motor runs in one direction and while you press the other button motor runs in other direction. (once you take off your finger from any button the motor stops). Speed controlling also should work.

[mc]

I tried with 3 different motor drivers and 2 different stepper motors. I changed the wiring locations but it still does not work. The motor only makes right and left where it is. The project does not work properly as in the video. Only the screen works properly

[andrie]

Alhamdulillah, .. greetings from your brother in faith in Indonesia ... Jazakallahu khoir

[星宿野菜]

Hello
Really great video
Politely ask why the negative pole of the power supply is connected to the GND connector instead of the negative (-) connector.

[msoo]

Without L298N
I want to use the TMC2208 driver.
I would appreciate it if you could tell me how.

[ธรรมศักดิ์-คป]

THank you for this project You can bring Keypad to control Step Motor project

[sebbavieira]

Muito bom, você poderia incorporar esse projeto um controle pid de temperatura também? Obrigado

[sam]

many many thanks to you bro, its so useful .

[CristiTudorache-lr]

hello, can you make a video where you can add a tachometer to this system and show the rpm on the display with the cod?

[jaswantkumarrajoriya]

Brother push button clockwise or anti clockwise ki jagah par proximity sensor use krna hai wo kese kre

[christianurra]

I would like to control two motors a Nema 42 and a 57 with one display and the same buttons. Do you have any help on how to do this? please

[devidasmane]

A very good video with link for schematic and code. How to increase the speed of the motor I mean full speed ....?

[amatoratolye]

Bro your website is not working. Can you share the arduino code please ?

[electronicsideas]

very good i need to run more speed how possible??

[eastindiacompany]

Hi sir.
Nice vedio and helpful for automation for learner and professionals users.
please confirm about the timer can be programmed in this programming .
I m from India.

[filipfusion]

Nice tutorial ! Why did you plug the stepper that way? It seems that phase A is red blue and phase 2 is Black green, no ? I tried with a 17hs19 motor but when i plug the motor it resets when pushing the buttons. And the motor makes noise but does not turn. When the motor is not plugged the program works well.. any clue ?

[mohammadfadaeevatan]

Thanks for your efforts! I did all of thing you have done. but it does not work. How can we communicate and solve my problem?

[WhatsUpDawgss]

Would you tell me what simulation software did you use?

[ghufi]

Good, dear i want one project coding. want to rotate stepper motor for 120 turns and then stop and reset again. only in one direction. please tell me the code. also want to connect one lcd for counter, which will reset also when 120 turns complete.