SoundQubed 4500s Clamp test for RMS Output

RESULT: 3,315 RMS @1.347ohm at 12.3V on 1 amp(description below)
2 4500s STRAPPED AMPS @0.5 OHM:
133.7V x 49.6A = 6,631 RMS Watts
133.7V / 49.6A = 2.697 ohm
EACH AMP:
6,631 / 2 = 3,315 RMS Watts per amp
Ohm Reading = 2.697/2 = 1.347 Ohm per amp
*This was true reading at 40hz test tone with voltage at 12.3v, so the sq4500 puts out true power its rated at for a 12v system.

SUBSCRIBE & LIKE!
Follow/Like me on Facebook: @JacobViral

[tatert.v.]

Im thinking about buying my 3rd soundqubed 4.5k!! I have 2 but im thinking I need 1 more for my new build this summer!!

[TrendyBromando]

I noticed there were two positive output speaker wires and the clamp was only around one of them. I have two pairs of subs connected to my mono amp, so im using both of my positive and negative outputs so will i need to put the clamp around each positive speaker output or just one of them?

[nathanielwalker]

that's good numbers I clamped 3600 out of mine @.5 ohms I'm trying to get a little more if I can.

[robshekelberg]

I heard clamping doeant matter, a reputable builder told me an amp could clamp 2000 watts and be a 5k amp and it would still be as loud as another amp clamping 4000, apparently more power doeant always equal louder

[tatert.v.]

Hey that knu konceptz speaker wire is it the 10awg? or 8?

[Supercharged]

When Clamping you must also divide your result by the square root of 2 (1.414) to get watts. Volts x Amps = VA not watts. That is how you calculate R.M.S. (Root, Mean, Square). 4689 watts was total power 2344 watts each.

[MrRotery]

I ordered a walfram 4500 and I got 2 zvx 12v2 I know it will depend on my box and all that other good stuff but what you think I will get around for rms ?