Gruven 2019 Ram Mirror Part Replace

[tustinsystems]

Thanks for this valuable info. Both of the mirrors on my 2019 1500 stopped working, (they just clicked). By following this video, I was able to install new metal gears on both mirrors. Cutting open the plastic motor housing takes patience but is not hard at all. After digging all the plastic shrapnel out of the motor housings, I used a few dabs of white lithium grease on the new metal gears. I used JB Weld PlasticWeld instead of the Marine version to seal the motor housing. This job took about 1 hour per side (not counting cure time) and is relatively easy if you use this video as a guide. Both mirrors now fold in and out like new! 😀

[Jaxon]

Thanks for making this video
I just ordered

[ChevySS]

Thanks very much for the vid! I just did the passenger side mirror. It was a bitch of a job IMO. Lots of little details to keep in play. Took me about 4 hours of work time. BUT the mirror works great now, smooth and solid!!!!

[benrogers]

What kind of grease did you use in the actual motor?

[shotokankaratedo]

I own 2019 Ram 1500 Bighorn with both mirrors ticking and grinding bad now. Im need kit for both side are they available?

[atplowman]

Both my mirrors work intermittently. Is that the main symptomM wondering why one problematic gear would prevent both from operating correctly.

[markcapestro]

Great video!
It's frustrating how Dodge made good mirrors but decided to use frail plastic gearing.

[larryball]

What is that part called that's under the turn signal that you popped out and the puddle lamp is under neath it?

[mattlester]

So did you end up getting this fixed? And what was it doing to cause the repair? Our ram when you extend the mirror out it’s trying to go past the limiter

[michaellaird]

Would you happen to have a link to this part??

[cobraspyguy]

Does the gear set also come with the large plastic ring you replaced

[mr.november]

Can this same process be used for 4th gen tow mirrors?

[waynotogo]

2020 Ram 1500 Bighorn: The electrical connector for the mirror glass adjustment is held in by metal tabs on the metal arm. You have to remove the T10 screw from the center of the mirror glass adjuster unit, may have to pry gently on the three tabs (from the back) at the 10, 2, & 6 position. Pull the adjuster unit out, unplug the connector (no tab). You can leave it off until later or put the screw back in a couple of threads to hold it until you're ready to plug it back in. Hope this helps someone.

[insulatorone]

SOMEONE PLEASE HELP! My power folding mirror on my passenger side will not work. I just bought a used Ram from a Chrysler dealer that's in really good shape but I realized after a week of having it that the passenger mirror will not work. I also noticed that the mirror is a little loose and when driving it shakes a bit.

[robertkeithkkimball]

My local dealer wants $2500 to replace the mirrors. I'll try this or do without the folding mirror before I pay $2500.