FeelTech Dual Channel Function/Arbitrary Waveform Generator

I unbox the product and take a look at the basic features. There is a LOT more to it - well worth investigating.

Here is the full link to the blog entry...

Something not covered in detail is the range of the generator - and it's ability to generate a varying DC output.

I tested the frequency range at the bottom end, leaving my Owon Digital scope on 1000 seconds per division overnight and taking the Feeltech square wave output down toward that range - sure enough, 2 square waves overnight"!! And the Feeltech is capable of running 100 times slower than that!!!

If you are not already a SUBSCRIBER to my Youtube video TECH channel - doing so would be very helpful and of course it is free. Also THUMBS UP and SHARE if appropriate - thanks a LOT for your help.

[PeterScargill]

Not forgotten about this useful unit.. spent Christmas through January in hospital with no access to any of my gadgets, hopefully before long, I'll be able to get back into full swing but not before taking a well earned break in the sun.

[ats]

Thumbs up for a very nice review, but was hoping you would open it up and let us look inside. But after seeing your review, I ordered the slightly newer FeelTech 6800-60M for $95 with free shipping, so I'll be able to rip open my own unit in a few weeks!

[jrtuae]

Nice presentation Peter, nice piece of kit

[caulktel]

Thanks for the review. I have the 60Mhz version and like it very well except for power supply leakage. Mine has 50 volts of mains voltage on the BNC connectors to ground. I have ordered a new isolated P/S from BangGood to fix the problem.

[TheAlwaysImprovingGarage]

Is this still working well for you? I've read about firmware issues in v3.0 and 3.1

[PeterScargill]

Hmm, I am having a little issue finding out more about the use of that serial port... anyone ahead of me already?

[Ziplock]

Alreet mate. I'm just about to order one of these. You sound local to me?

[nicksalcido]

Can anybody tell me if this can use a pulsed carrier mhz frequency along with a pulsed hz frequency at the same time? if so, what's the highest setting and voltage without distortion?

[tobortine]

00:50 _"...there's a mains lead that came as a bit of a shock..."_ No pun intended? ;-)

[TheFlyre]

hi friend i need help.

How do i sweep from 1 to 2 over and over again.
This video talk about it if you put it at 7:20 you will see it.
But seem like the number is not doing what hes doing on the screen.
I have the Fy6600-60M i dont know what setting is it at i dont have oscilloscope