3 Simple ways of programming an ESP-12 Module

preview_player
Показать описание
In this video we will take a look at 3 different ways of programming an ESP8266-12 Module.

This is a re-upload with fixed wiring diagrams.

---------------------------------
External Links:
---------------------------------

---------------------------------
Hardware:
---------------------------------

or

---------------------------------
Live Streams:
---------------------------------
(both times Dublin/London)

---------------------------------
Other Platforms:
---------------------------------

---------------------------------
My Tools & Kit*:
---------------------------------

Ts-100 Soldering Iron

Logitech C920 HD 1080p Pro webcam

Blue Snowball USB Microphone

Self Adjusting Wire Strippers

Support what I do by using my Amazon Affiliate links:

*= Affiliate Links
Рекомендации по теме
Комментарии
Автор

never used esp12 before and needed quick concise instruction ....found it here !...cheers.

andymouse
Автор

First of all thanks a lot Brian , that second method really worked for me, i have tried more than 7-8 method over 15 days, then at some point i thought that my "ESP8266 12E" is defective, i may have not soldered it correctly, or may be i have already blown it . . . . . , so i brought two more, again i was't able to upload code, then i saw your video, again i same thing .
Then i accidentally UPLOADED the codes XD - LOL

so here is the precise Observation to all those who are still not able to make through even after watching multiple tutorial online (just as me) --
" press Boot button first, keep it pressed, then press the reset button (at least for a sec) then release reset button (remember we haven't released boot button ), (wait for another sec), then release Boot button ", YOU are in now .

thanks again Brain :: Greetings from INDIA

rohanprak
Автор

Awesome Brian! Programming the 12X from a nodemcu is super clever!

UnexpectedMaker
Автор

In case this helps someone: If you're using an ESP-12S which is already on a PCB, pull both GPIO0 and RESET to ground when you arrive at the "uploading" (after "compiling") stage. After a second or so, stop pulling the pins to ground (I happened to stop pulling RESET and then GPIO0 when I did it, in that order) and uploading should commence. Thank you for the helpful video, Brian!

arjunpamidi
Автор

TURN IT ON! I got the board that you snap the 12E/F into for upload. Took me a week just to learn it has to be turned on. Found that here. By watching your hand. My board is not labeled. I was ready to send it back. 100XThank you.

STEVEJOY
Автор

Your wiring diagram is the most crystal clear. Great video!

TheChubbypapa
Автор

Thank you, a GREAT VIDEO,
NO music
Great info, very clear,

THANK YOU

tonysicily
Автор

I bought a NodeMCU board a while back because we'll, you gotta catch them all! Glad it's useful now!

jon_raymond
Автор

it was a great Help. Thank you
NOTE: in case of using breakout boards, they have those pull up/pull down resistors by default. so respective connections can be omitted.

faramarzzabihian
Автор

Great video Brian! took me many times to program this ESP-12S, but this video cleared up a few things.
Using "Arduino IDE" to program.

agustinguzman
Автор

Using the nodeMcu it was the only way that works fro me! thank you very much for the idea!

rachidsbai
Автор

You are a genius! Thank you for sharing this!

giocanni
Автор

Nice I am going to definitly use this sometime.

connorchapman
Автор

Nice video Brian. Not sure if I will ever need to program a bare esp but good to know how to do it.

Hasitier
Автор

That was a nice idea, Thank you for such a great information.

varunkulkarni
Автор

dude ur video really helped me and saved time & money for me.tnks

justembedit
Автор

ótimo video, funcionou perfeitamente. fiz a ultima opção usando o NudeMcu e deu tudo certo, muito obrigado por encimar

fabiano_bim
Автор

Thx for this nice Video

helps me a lot

philippkitzmuller
Автор

The idea of using the nodeMCU is brilliant. But can't the ESP12E just be jumpered over without the resistors since all the resistors and switches are already on the node MCU? Seems even simpler this way.

gregsegallis
Автор

Pls Help me! If i want to Upload Code to nodeMcu it says that there are no programmers available! Pls Help, what should i do?!

startobytes
welcome to shbcf.ru