How to Replace S-Cams And Bushings on semi trailer (step by step)

[ChiefArrows]

You have really great and informative videos. Great camera focus, lighting and easy to follow instructions. I appreciate your work. Thank you!

[roynevarez]

Se dejaron cae chingones !!! Es el primer video a detalle q veo de mecánica !!! Saludos desde Nuevo México mis chingones !!!

[johnnegrey]

Easy if nothing is seized, journeyman trailer mechanic here Canada.

[skylinemusik]

Pretty cool bro, I wanna learn the basics and start doing jobs on my own. I have a bunch of friends that are truckers. I also wanna start a roadside service so I need to learn

[cbmech]

Unless there is some other issue I never pull the hubs to do s cams and bushings. Pull the cam tube and knock the outer bushing out and the cam will get enough angle to slide out, put the seal and bushing on the new s cam and drive it back in. I use a short piece of an old cam to drive the bushing into the tube. Trailers are easier but it's pretty much the same

[joedabs]

Great video we need more informative techs willing to educate others.. definitely will subscribe to your channel look forward to more like this

[Nato-kzhe]

Usually when putting on those seals we use an old frame bushing boltalong with the washer to use as a punch. Keeps that seal straight and centered all the way through. Kinda like putting oil seals on.

[martinmartinez]

Carnal ; to install the seals, just cut the old s cam about 6 inches long from the outside of the S side and drive the seals with it, just use 1 of the big washers between the S and the seals so you can have a flat surface to drive them perfectly, a lot easier and faster 👍🏼👍🏼

[kienhuynh]

By the way always appreciate all the videos you posted on your YouTube channel.

[masontymenson]

awesome video contains a lot of very useful details been explained clearly, well done and thanks for post it and you got thump up from me now, wish you both very good luck always till next videos keep it up

[austinbober]

If you get the bushing out while the cam is still in, you can remove without removing the hub just gotta apply some heat and the bushings will become real easy to remove with a flathead

[michaeltyner]

Great video, very well done, thank you for posting this video

[g.a]

great job! and how much replace on the 2 trailer axles? where a you are located?

[angelrodriquez]

Gracias, for all you help on changing scams I was waiting for three months

[CORKILL]

Probably had trouble with the free-play of you bushing because your using a puller for your brass bushings witch flared them . Use a tube shape punch . Use the s-cam with washer to fit your seal perfectly on. Saves me lots of time

[painkey]

You can get the s cam past the hub if you cut it in half. With the old seals and bushing gone there should be enough room for the new cam, you just have to put your washer, seal and bushing on the cam first.

[juansalazar]

It's 2024 and even the mechanics nowadays are inflated lol thanks for the video bro

[pauln]

Thanks for the video. Keep up the great work!!

[myffcobra]

Thanks for posting this video! Very helpful

[PickupsAreNotTrucks]

Can I please get a part number for this S cam kit. I’ve got something similar and been broke down over a week because nobody knows what parts I need. Please let me know. Thank you!