Aftermarket Seat Install FRS BRZ 86

New Seat Bolt: SU003-07863

Find your FRS, BRZ, 86 and A90 Supra parts here:

[justinhuang]

Damn it's like you guys knew I was looking at Bride seats just now....

[TimurIskhodzhanov]

Even though aftermarket seats sure look cool and all, it's important to remind the viewer about some safety concerns:
1) Aftermarket seats don't have side airbags, which compromises the driver's safety in case of a side impact.
2) Some people consider fixed-back seats unsafe without a roll bar / roll cage / half cage in the event of a rollover if the roof crumples. You are likely to not pass tech inspection with certain track organizations.
3) Safety components in a car are designed to work in a system. A popular opinion is that either keep everything OEM, or go "all in" (bucket seat, 5+ point harness, HANS, roll bar / half cage / full cage).

[nickjaramillo]

Okay so i have a 2013 FRS with those pain in the ass bolts as soon as i started i knew it was gonna be difficult because i only had a socket and wrench handy no gun, so to anybody struggling to get those bolts out i used a torch put the flame really low and held it right on top of it for about 1 minute or so until it loosened it didnt burn the carpet much at all and it worked like a charm for both seats just wanted to share this with those of you with an early model frs/86/brz like me cheers guys enjoy your new bucket seat!

[hamill]

Never wear a harness without a helmet and hans device. Your neck will thank you for using the stock seatbelt if you crash

[wyyn]

Same set up as me, except I have the Bride Zeta iii.
My Buddy club rails had to be super lubed up when installing. Sliding took a bit of force, but once lubed it's pretty good. I just used white lithium grease.

Also PRO TIP should mention the bolts holding the seat to the floor need to be 100% aligned or you won't be able to slide at all.

[slipstream]

Read your post on 86 track cars page. Nice to see that you transferred some of that info into your video. Keep up the good work.

[brodygodin]

Nice i was ironically talking about putting these seats in my car a few hours ago. This is gonna be my guide vid 🤟🏼

[klepetar]

thank you for the video.. i wanted to remove my seat and check out the underside because the bozo that owned my frs before me drove it in the winter and was a very messy person..

[brandoncavazos]

Really wanna see what you guys think of the 2022 GR86

[navawtff]

But I couldn’t see Joe you got them out the wires from under the seat… seems quite difficult instructions lol

[joelvillalobos]

Do you think the XL version would fit in the FRS? I’m looking for some seats for my ek civic hatch, and really like the profi SPG, but worried that the regular size is too small for my build. I’m 5’9” 190 ish, and have a decent size booty and thigh.

[hanielhluz]

Where can I get a resistors that works for my Toyota 86 I have aftermarket seats but the airbag light still on and I installed some 3.3 ohms and still doesn’t work anybody can help out before I decide to go back to stock seats

[shinigami]

So when's the rollover cage video?

[danielpickett]

Does this seat sit lower than the OEM seat and give you more headroom?

[kev]

I was interested in purchasing the spec d headlights but they sold out and the stimmy code didnt work for me 💔. I email ya twice no answer so far

[jorqlip]

My chair came with steel slabs that say recaro do I use that to install my chair or do I need a vehicle specific mount?

[nathanluong]

Hi, would you be able to add where you found the seatbelt extension?

[LarryASC]

Can someone still get to the back seat since it's not reclinable? & Did it affect the legroom in the backseat at all?

[zhiyaoma]

Hi there. Could someone tell me where I can get the tool to remove the 12mm bolt? (4:05)

[GianPaoloVecchi]

How much difficult to get out of the car with Recaro Pole Position?