Raspberry Pi Pico 2 Quick Setup: The Beginner’s Guide

Ready to get started with your Raspberry Pi Pico 2 from scratch? In this tutorial, you’ll learn how to enter bootloader mode, flash MicroPython via a UF2 file, and program a simple LED blink using the Thonny IDE. We’ll also explore expansion possibilities with I2C, SPI, UART, and Wi-Fi so you can build exciting DIY electronics projects. By the end, you’ll have your Raspberry Pi Pico 2 ready to go for sensors, servos, or even an OLED display!

Timestamps
0:00 – Introduction & Required Hardware
0:22 – Installing Thonny IDE for MicroPython
0:45 – Entering bootloader mode on the Pico 2
1:15 – Downloading & Dragging the UF2 file
1:45 – Connecting with Thonny & Setting Interpreter
2:15 – Simple LED blink on GPIO pin 15
2:40 – Testing Additional Components (I2C, SPI, UART)
3:05 – Exploring Wi-Fi & Advanced Projects
3:30 – Closing Thoughts & Next Steps

Key Talking Points
Raspberry Pi Pico 2 setup: from unboxing to firmware flashing
Installing and configuring Thonny IDE
Bootloader mode & drag-and-drop firmware for quick setup
Running a beginner MicroPython tutorial (LED blink)
Future project ideas: Pico 2 I2C, SPI, UART, Wi-Fi
Comparison of Pi Pico 2 vs. original Pico (optional upgrade insights)
Tips for using breadboard and GPIO safely

Join the Community

Code
import machine
import utime

led_pin = machine.Pin(15, machine.Pin.OUT)

while True:

Disclaimer
This video is for educational and demonstrational purposes. Actual results may vary depending on your setup and experience level. Always follow the official Raspberry Pi documentation, verify voltage/current limits, and take proper safety measures when working with electronics. We are not liable for any damages or issues arising from the use of this information.

If you found this video helpful, please like, subscribe, and let us know in the comments which Pico 2 projects you’re excited to try next!

[crazyminded]

bro i have a bluetooth speaker it also has mike and fm so using this pico 2W can i turn it into smart speaker like alexa . and also can i know what to do from scratch with how to connect the existing speaker and mic to it