HOW TO best FPV the FatShark TRINITY HEAD TRACKER Module STAND ALONE System.I DO RC 1080 60fps 2021

preview_player
Показать описание
#fpv #trinity #headtracker

The Video ‘MANY REQUESTED’,

HOW TO MAKE THE.....

‘FatShark TRINITY HEAD TRACKER 3-axis Module into a STAND-ALONE System to use on
ANY FPV Goggles.’

I have had many requests to show a wiring diagram of how to TURN the TRINITY HEAD TRACKER MODULE, designed to fit inside the FATSHARK goggles, into a STAND ALONE system that can be fitted to any FPV goggles.
It is linked to your transmitter (I’m using a TARANIS) via an AUX standard 3.5mm audio cable.
I’m using it on the DJI HD FPV goggles with the Hobbyking QUANUM 3-axis Pan/Tilt servo system. I have replaced my servos with SAVOX 4kg micro servos due to the weak performance of the original supplied servos for the Quanum.
The head tracker servos are plugged into channels 5/6 (default setting for pan 5/tilt 6) of the transmitters receiver. The head tracker takes control via some transmitter programming to enable trainer mode for these receiver channels to be controlled by the head tracker. Turning the head tracker left sends a signal to the receivers channel 5 (pan) and activates the pan servo to also move left, it is pretty much instant to your movements and can be fine tuned for speed and accuracy via your transmitter just like you would steering or throttle.
A really truely Amazing experience.
As far as I know there is NO other video showing how to do this.
I searched for many months and sent many question, most unanswered, to be able to do this, I feel it’s my duty to share the knowledge. A HD FPV HEAD TRACKING EXPERIENCE Like this everyone should share.

HOW TO BUILD/PARTS USED-Axial Capra DJI HD FPV Goggle/Air Unit 1080 60fps I DO RC-BEST FPV CRAWLER ULTIMATE AXIAL CAPRA RC Rock Crawler DJI HD FPV Goggles HEAD TRACKER DJI Air Unit Camera 1080 60fpsULTIMATE AXIAL CAPRA Rock Crawler DJI HD FPV Goggles HEAD TRACKER Air Unit System camera 1080 60fps CAUTION: you WILL want one after seeing this video, Axial Capra 1.9 unlimited trail buggy fully modified and upgraded for performance.
If you have subscribed to my channel I will answer all questions relating to this and give details of how I went about it and where to purchase the products.
If you would like to see at normal speed please select the 2x playing speed. All videos are recorded at 1080p 60fps or higher and slowed to 50%. Double speed viewing is at normal record speed.
ABOUT:
I DO RC (aka Adam Harding) was established to bring you the highest quality, highly produced, RC videos. All shot in 1080p 60fps or higher, of high end fully upgraded RC cars and crawlers.
These videos are to inspire and educate all RC enthusiasts on great upgraded parts and RC advice.
I DO RC has custom made outdoor courses for 1/10 and 1/24 scale rock crawlers and a track for 1/8 scale Short Course Rally cars.
DJI HD FPV Goggles, DJI air unit system camera, hobby king quanum 3 axis servo pan/tilt FPV.
7" action figure driver terminator figure, Yeah Racing Desert lizard internal spring alloy black 90mm shocks. 1/10 rock crawler, 2.2 inch beadlock beadloc wheels, 2.2 inch proline super swamper tires tyres, axial Capra yeah racing black aluminium low profile stinger, front bumper, upgraded steel driveshafts, Vanquish black aluminium Capra front currie F9 portal axle, Yeah Racing black HD steel axial Capra front and rear centre drive shafts.
modified body, black paint, GoPro Hero 7 black, dusk white limited edition camera, 1080p 60fps, best rock crawler course, the best Yeah Racing X Dark Dragon Wing motion steering wheel for 1/10 RC cars. the Helmut that the camera is inside is one of the original helmets from the Capra drivers.Yeah Racing 1/10 seatbelt harness. I removed the arms and hands from the Terminator action figure and reattached with wire fishing line to increase smoothness of arm and hand movements on the wheel.DJI HD Head Unit System, dji hd fpv goggles in car with head tracker.
Рекомендации по теме
Комментарии
Автор

The driver is really amazing. Congratulation the perfect work.

sonarfleet
Автор

Great! Now this is cristal clear😉
Thanks a lot for all your work and share👍

FPV-glwe
Автор

I subscribed because because I appreciate you sharing and, like you said, for some reason all the other head trackers have disappeared

jacobkeller
Автор

Can you tell me what the connection points are on the board, is there a diagram?

ผัวเมียพากันเที่ยว
Автор

Woot! Sounds like an aussie accent! Even better.

shadenphoenix
Автор

Terrific tutorial! I have this module but barely have the time to go flying let alone build anything nowadays…wondering if anyone builds these for a handsome fee along with my fat shark tracker module (as a “core”)to build this awesome device i wish DJI made for us warbird lovers. I have paypal!….?

MonstroLab
Автор

Yes!!!! Finally some good info on how to do this. THANK YOU!

flipfpv