Atezr L2: Unveiling the Next Generation of Laser Technology

Atezr has returned with what it claims a second-generation diode laser, dubbed the Atezr L2. With its sleek design and superior performance, the Atezr L2 pushes the boundaries of design and adds new features not found in other lasers.

It is a new cutting-edge laser that is poised to revolutionize the industry, but is it truly the next generation? Join me as I cover the enhanced features and capabilities of this new offering and put it through its paces.

f this review convinces you to buy an Atezr V35 then feel free to use the following affiliate link and save some additional money with my coupon code "stevemakeseverything".

You can also still buy Atezr's other fine lasers too:

►►►► SOCIAL MEDIA
• Instagram ➭ @slicedpidesign

►►►► SAVE MONEY NOW! (I may earn commissions)

FTC Legal Disclaimer - Some links found in this description may be affiliate links, meaning I will make a commission on sales you make through my link. This is at no extra cost to you to use my links/codes; it's just one more way to support me and my channel.

►►►► MY MAKER SPACE
Laser/Vinyl Cutters
SP-3624 90W 36"x24" self designed laser
Full Spectrum Laser Muse 3D
3D Printers
Sliced-Pi ]|[ CoreXY (self-designed)
Sliced-Pi ][ CoreXY (self-designed)
Prusa I3Mk3 with MMU 2
Creality CR-10 (massively upgraded)
CNC Router

►►►► SOFTWARE I USE

#stevemakeseverything #atezr #maker #diodelaser #laserengraver #laserengraving #laserengravingmachine #laserbusiness #lasercutting

[g-paj]

Hey there Steve. Great review as usual 😊

[cdmoran]

Great video, thanks. I'm doing my due diligence before investing in my first laser engraver. On the autofocus issue, in the clip you showed it operating there was a bow in the material that could be an issue.

[darrellreed]

I’m very excited about this machine! It’s absolutely the nicest, most feature rich one currently available imho, especially at the sale price! I can’t wait for mine to arrive. I’m eager to know your thoughts on the difference(s) between LaserGRBL vs LightBurn. Is LightBurn worth paying for?

[eddiec]

Hi Steve, it seems that folks say that you can't cut clear acrylic with a diode laser. As the guru of all things laser, have you found this to be the case? I have an Atezr L2 36W, my attempts so far kinda cut through but the acrylic seems to 'heal' itself as it progresses through the job, i.e. the cuts melt back together. Any advice? Kind regards, Eddie

[rustyridgley]

Good afternoon. Looking to buy my first laser engraver. I have watched a ot of your videos. I have narrowed it down to 3 lasers just wanted to get your opinion on the 3. First on Sculpfun S30 Pro Max. Second The Atezr P20 Plus. Third Atezr L2 24w. I have watched the one you can put crosshairs on the laser with the ones that dont have one. All 20w lasers. Thanks for your help.

[kenkozimor]

Good review, one question, does the air assist come on through lightburn or do you have to do it by hand?

[ToolnKnives]

Looking for first hand experience. Will the L2 24W etch a hardened knife blade?

[hacklabdesign]

I’m confused with the auto focus every time that I do that I get an error code it seems to over limit I’m wondering if I have my macro set wrong?

[donalddunn]

You talk about the cross hairs in this YouTube. I was hoping for more information about this. Can you tell me how to turn that cross hair on and off? Mine does not come on and I need to know if it's a problem with the machine or if something got turned off some how?

[cherrytrees]

Hello again...finally got my cover and ready to test my laser.
I tried to click the Homing button...its goes up and down then buzzes and doesnt move. Same noise trying to move it with the arrows. Is there some kind of lock I'm supposed to undo?😊

[DoggNite]

Didn't the iker k1 pro come out before Atezr l2?
They are almost identical.
You should do a comparison review on them.

[B.A.Bassangler]

Hi! Enjoying your reviews, while I try to narrow down my choices (maybe too many).
Would you say the Atezr L2 has as good of engraving quality as the Acmer? I am struggling to keep my question short and to the point, but you are free to expound as much as you feel necessary, lol.

[ElisTamula]

Great video! I was already set on buying a Longer Laser B1 20W... but this one seems pretty comparable, I feel like the autofocus is a good thing to have. Which would you pick between the two, Longer or Atezr L2?

[alxhiding]

do you think the auto-focus feature will be adjusted via firmware?

im in the market deciding between L2 24W and P20, not sure if the L2 is worth it or not because the value the P20 represents currently (can pretty much get a bed + extension rails + money in pocket for the price of the L2).

the auto-focus feature, the ability to only turn on laser fans when its being used (quietness as you mentioned) and the lightburn controlled air assist are the three big ones, but it also just looks like an even sturdier unit.

[ericeinsmann]

Steve interesting video! I'm not really looking for a new laser, but I figured what the heck, I'll watch it anyway.. A couple of things caught my attention. The crosshair.. I didn't know that there was an adjustment for it where you can make it very accurate. This makes me think you could affix something small and somewhat pointy (like a bent paperclip) to the laser and use that as a substitute for a laser crosshair for someone who doesn't have that option. The auto focus being slow.. I know there are G-code settings for things like homing speed, work area size, ect.. Maybe there is a G-code setting where you could speed it up? Just a thought.. Thanks, Eric

[isaiahgillett]

Is the focusing knob as wobbly as it appears on vid?

[italytrader]

Hi, how can I engrave stainless steel blue color or white ? thanks for her . I use Azter 35W

[richardedgington]

Looking at buying 24 or 36 watt how can I get a hold of the company?

[alieucham]

hi i need help my laser Atezr L2 36watts still not firing.... i have tried all solutions from other youtubers still results and worst thing is cannot connect Atezr...
Do you have their contact for after sale services.

[jamescullins]

Looks great! I wonder if I could adapt the head to my Aetzr P10. I don't like the swing-down thing for setting focus. With auto-focus, you need to know the correct focus distance for the laser head you are using. Then a way to measure the current distance. Maybe a laser distance-measuring chip with an analog output would be a start...