X-UAV Talon Pro Long Range Build

Показать описание

Here's my build of the XUAV Talon Pro (aka Mini Talon V2). I have used some 3D printed parts for this build. I also opted to use a Pixhawk lite flight controller rather than a regular all-in-one FC like Matek Wing F405, as I intend to use this as a small mapper. Also, I have covered the entire plane with 3mil laminating film, and added two layers of 5mil laminating film for the belly of the fuselage to make it tough.

Specs of my build:
X-UAV Talon Pro 1350mm
Pixhawk lite flight controller
Ublox M8N GPS
MFD Nimbus x2814 510KV motor
Emax es09md servos for the Vtail
Hitec HS-5085mg for the wings
Runcam Phoenix nano Bardwell ed. FPV camera
Runcam HD
Caddx Turtle V2
3-way camera switcher
Digital airspeed sensor (i2c) with pitot tube
Matek 5in1 pdb
Hobbywing flyfun v5 40A esc
Aeronaut CAM carbon folding propeller 10x7
Matek 1.3ghz
Singularity RHCP sidefeed 1.3gHz antenna
Dragonlink nano rx with dragonlink antenna
mpx connectors
0.96" OLED
3D printed parts

6s2p 9600mAh 21700cell custom battery pack
6s3p 15000mAh 21700cell custom battery pack

AUW: 2260g

-------------
check out BUILD UPDATE on the talon pro :.
-------------

****PLEASE LIKE AND SUBSCRIBE TO MY CHANNEL FOR MORE VIDEOS****

––––––––––––––––––––––––––––––
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
––––––––––––––––––––––––––––––

Рекомендации по теме

Комментарии

sweet setup! The way you modified the nose has given me some good ideas on what to do with mine... I have glued mine and I am waiting for the servos and matek f405 fc to arrive

giorgiontanas

You did an excellent job upgrading this plane. My students would like to do what you have done to get practice 3d printing and re-engineering.

georgekilgore

as always, your work remains excellent.

JokoKangaroo

You have done a really good job with your Talon, I have the larger version and i can only hope my plane will be half as good as yours. All those 3d printed bit and pieces you should make a sell them they look great, if you ever do let me know i would pay for them and so would alot of other people.

ToothlessAndy

Awesome build mate. The cutout spaces for the VTX and RX in the wings look nice, did you use a foam cutter for that?

tianzheng

👏🏻👏🏻👏🏻👏🏻looks good. Now that I’ve seen all your videos and all your different planes, what’s your very best or favorite long range plane and why?

rodeopilot

Nice build. Could you please tell me where to find that airspeed sensor pitot tube mount?

cdavidnk

Did you thought of reinforcing the area under the wing where it connects with fuselage as it's just foam. I took a flight with this craft.. it flew beautifully. But after few hard turns the wing seperated from the fuselage in the air and whole thing just came crashing to the ground.

RaviSingh-wkqk

Nice build! I like your Dragon Link Rx antenna arrangement which allows it to fold flat against the wing for transport packing. What li-ion 21700 brand do you use?

joremontelibano