DIY Battery Powered Bluetooth Speaker // How To Build - Woodworking

📦 Materials Used On The Bluetooth Speaker (affiliate):

🛠 Tools Used On The Bluetooth Speaker (affiliate):

📲 FOLLOW CRAFTED WORKSHOP!

[nualln]

My first job was soldering audio jacks for an entire summer so I got pretty good at it. I ended up working at that place for almost 10 years. I'd say you did a really good job for your first time soldering. Here are my two biggest tips: 1 - put a dab of solder on the tip of the gun before touching it to the wires. This helps transmit heat from the iron to the wire. You want the wires hot enough to melt the solder, otherwise you'll get a cold joint that could break or have lots of resistance. 2 - Use spring clamps to hold your parts. Just put them on their side and clamp the part in place.

[carlalbertocolombo]

I've watched bunches of videos like this, I built 7 boomboxes on my own and I can officially say that this is the best one I've ever seen, good job!

[MarianoBarutta]

This looks great!! The only addition I would do is to install a couple of 12v 8Ah batteries and charger so you can make it a portable great looking boombox! It will require some additional electronics to convert 110v to 12v, to measure charge and stop charging when full... but I think it would be totally worth it!

[joonasfi]

Looking badass! Can't go wrong with choosing walnut... so gorgeous.

[MrHans]

You truly are a master craftsman. I haven't seen a craftsman like you since the New Yankee Workshop on PBS back in the 90s.

[ashjamben]

For more videos on speakers builds, can’t recommend Kirby Meets Audio enough!

[TrailFeatures]

If it sounds anything like it looks, it must be amazing. Such an awesome project!

[geoffreycoulborn]

Great fun building three of these. Two went to my boys as Christmas gifts. The other is for my wife and me to use at lake side in the North Georgia mountains.

[dannykamermans]

Wow - Awesome. It's so refreshing to see a speaker build by a woodworker. Accuracy, detail and great looks.

[bentheredonethat]

Great project and she is Beautiful I’m heading to my shop now to take a set of 18yr old computer speakers my good friend Dave gave last week and do the same. Unbelievable that he has had them that long and they sound great. They come with a separate subwoofer.

[joshsmith]

Really clean. I liked the router fix for the hole.

[VoltageGuy]

I like how you used a crossover to better produce the low and high frequencies separately for a clearer and better soundstage audio output. The cabinet was also created flawlessly which is a nice combination for hifi audio.

[steamy]

Very nice speaker build. But most of us don't have all the fancy tools to do this. I built one out of plywood and car stereo media player and car speakers. 12 volt LiFEPo4 battery and charger and sounds great, no foam inside and an vent hole on front panel. did I mention it sounds great. Lots of bass and good overall full range sound. I use it at work on my tool box. I may build a second one for home use or to replace the one at work and use that at home. will see.

[RobinsonDanieldosSantos]

How many incredible machines do you have?

[izored]

** dO It YoUrSelF ** with at least 100k worth of wood working :p

[SeanRD...]

It's Shawn Spencer (James Roday- rodriguez) "I've heard it both ways"
Thanks for the tutorial bud. Keep up the good work!

[scottbutler]

Gorgeous case...great deal on kit, Parts-Express is out until mid-Jan. Speakers and Tweeters alone are $138

[stevequincey]

OUTSTANDING! Think I'll build one myself now. Thanx for the confidence.

[jimmyz]

Great project, looks awesome!!!! Can't get enough of your French cleat wall in the background. Best background of any YouTuber maker I follow.

[GetFisted]

i have the C-Note kit on my table right now. The walnut was a great choice!