KOMOS 4 TAP KEGERATOR REVIEW

I’m lucky enough to have a chance to play with a brand new KOMOS kegerator this one has 4 taps. The first portion of the video is assembly the last portion is my review! Which do you prefer a Keezer or a kegerator how many tap handles do you have?

• I miss spoke in the video when I talked about Energy consumption of the KOMOS in 24 hours it only used about 0.64 KWH of electricity! I also have it set to 28°F not 30 I apologize for the mixup !

Subscribe:

Duotight Push-In Fitting - 6.5 mm (1/4 in.) x 9.5 mm (3/8 in.) Reducer {FOR CARB CAP}

Want to support the channel?
My MoreBeer Affiliate Link
My Teespring

My Instagram:
My
Tesla Referral Code:

MY Beard

Fav Brew Gear
My dry hop set up:

My Cam Gear
Cameras
Lenses
Microphone
Lights
Softbox
Fotodiox EZ-Pro:
Neewer Motorized Camera Slider



Remember
Home Brewing Is Good

[CarmichaelPatton]

Just got my first Komos, and this helped greatly. Thanks for the tutorial.

[danielfreeland]

Don’t forget the tower gasket! Because he did.

[thunderwagn]

My 20+ year old 4 tap keezer is limping along and I've squeezed about all I can out of it. Morebeer sent out an email yesterday about the komos being back in stock and your video I believe may just push me over the edge enough to pull the trigger. Love the evabarrier and Duo tight and I think I'm sold on the new Nuka faucets as well. Great video!

[HopsANDgnarly]

Those duo fittings are pretty darn slick and MAN your brewery is looking awesome!

[DavidHeathHomebrew]

Nicely done as always Bradley and welcome to the 4 tap Kegerator club. This is a rebrand of the Kegland series X for morebeer. Great Kegerator that I have been enjoying since last year.

[StevenDavisPhoto]

Thanks for the review, but why are you saying "kumos" when it's "komos"? At the moment I'm trying to decide between Komos and KegCo.

[marklorenz]

Excellent review and vid. This is by far and away become one of my favorite channels. The efficiency stats at the end were useful as was they way you put it together. Some really good "thinking-mans" tips and workarounds. Respect and thanks.

[charlesmiller]

Thanks for the vid, Bradley. My garage is insulated, and never gets above the upper 80s. I'm not worried about the low end. Any thoughts on such an ambient temperature (please chime in everybody if you can). I'd rather have the 4-tap regular stainless, instead of the 3-tap-maximum "outdoor". Thanks, all, for any input.

[TheMrtical]

Thanks for the tutorial! I took some of your advice on the CO2 setup and bought some of the parts you listed. So far so good and the disconnect for the tank is clutch!!!

[Taras]

Any advice regarding setting up 4 secondary regulators...I like to have several beers (ales/lagers) at slightly different carbonation levels.

[danjohnson]

If you’ve not pulled a beer off the tap for a week or two how’s the first few ounces? Is it warm/oxidized?

[christiandenny]

Thanks so much for posting this video. It was very helpful in setting up my Komos kegerator and saved me a lot of time and cussing if I hadn’t watched it.

[josephmichalek]

Great tutorial! I ordered all of the recommended parts, only problem is the reducer size is wrong. Having to resend out for 6.5 mm x 8 mm reducer, NOT the 9.5 mm. The shortcut under the video to more beer has the wrong size part for the reducer.

[DrunkDelilahBrewery]

Love it !!! - If it's any consolation buddy - my Short Circuit Brewing T Shirt is a little snug also !!!! 🤣😂🤣

[BlakeTonner]

Can you use this with only 1, 2 or 3 kegs connected or would you leak co2? Considering getting the quad tap to grow into but currently only have 2 kegs. Thanks!

[deckerhand]

Any issues with plugging right in if you waited three weeks to install

[Louz_Drumz]

I dont know man, I think that shirt makes you look kinda buff. Great review, I've been eyeballing these. I'm not familiar with these taps, are they compatible with the tapcooler? And I never understood why kegerators have the rail on top... its kind of annoying to be honest.

[stephenmatkin]

I'm in the processes of ordering and can't seem to find the right duotight fitting from ball lock cap to 8mm hosing. Did your kegerator come with 9.5mm hose as they make a fitting for that? Am I buying all the wrong size fittings?

[goosefraba]

this video had it all! great stuff @Portly Gentleman!

[jackharkness]

Just started mine and the sides of it are wicked hot. Like I can’t touch it for more than a couple of seconds. Seems to improve when the compressor is not running but damn, that can’t be safe. Plenty of space there, BTW.
Any thoughts on this?