My Acuvance Xarvis XX / RAD ESC Tune

Hello! Hope you like the video!

Chances are you’ll need to adjust this tune for your car, but it should be close enough so minimal adjustments can be done to fine tune for your car!

The motor in this video is the Agile 10.5T with a Torque Rotor.

[FPSRCDRIFT]

Great little vid 👌🏼 more technical points explained like this would be great. Subscribed 🫶🏻

[riyanpratama]

your video is very helpful for beginners, learn from something right. thank you... please make a video about setting up the futaba cd700 servo and gyd550 gyro.🙏🙏🙏

[frozenshade]

Great setup, I had qui similar setup on my xr10 stock spec. But boost rpm range was wider. Tried yours and it really work great, Thanks! Juste a quick note, you are talking about turbo activation rpm, but your turbo is set as trottle only. Im pretty sure that rpm doesn’t apply.

[frenchouillard]

I saw your videos of your new z at super g. The angle you are taking with this chassis is unbelievable. I would gladly appreciate a specs video of this particular chassis

[DanielJimenez-qqhb]

Thanks for this video! Great information.

[ShiftRPS]

This was awesome. Do you have any plans on doing spring choices as well as shock oil weights?

[JJInvertedProduction]

Could you do a video showing how to tune a Rad manually with Esc? Thanks

[rcdrift_guy]

Cool video! Can you tell me what kind of shock oil you use? And what springs?

[bustedknux]

Gyro tuning video(s) would be cool too

[jeffhamerslag]

any chance of a vid with you installing all of the capacitors :)

[michaelseguinot]

i got the rad w agile motor and i set my initial settings per instructions now i dont have reverse... any suggestions?

[rcdrift_guy]

Got a problem, can you help please? Connected xarvis xx and a-bus, futaba 7px. Everywhere the latest version of the update. Show everything except the temperature of the motor. Fledge motor, fully working

[Oliverclozof]

I just upgraded to the s.bus and went through all the updates required on the rx/tx & esc. Everything was working as it should. I then followed your tune on this video. Did one hit and now the motor won’t spin and all the lights on the esc are blinking. Please help! Did I just blow up my motor???

[JAM-vuol]

Hi Vittorio,
The wiring go close to esc or battery?

[vilnindyskiez]

What acuvance rotor is better torque or rpm whats the diffrence bro

[Louiedajew]

What software version allows BEC tuning through the s.bus?

[Splinterx]

Interesting settings on timing, how does that translate to trigger feel? you have no additional timing up to 12k rpm and also above 21k unless you full throttle. does this give your low and high throttle more resolution and less puch in a way since you don't have the extra timing kicking in?