Hotone Ampero II Stage | Live Setup To Speaker Cab AND Front Of House | Tutorial

More Tutorials:

Hi folks! This video will show you how I set up the Hotone Ampero II Stage for playing live with one set of outputs going to Front of House and another output going to a power amp and cab for use on stage.

Remember to like, subscribe and share. And let me know what you think of the tone and features of the Hotone Ampero II Stage!

Have an amazing day!

#Hotone #Ampero #Tutorial

——Support Links——

——Guitar Lesson Packs——

——CDs and Music Downloads——

——MY GEAR——

———————————

WEBSITES:

Timecodes:

0:00 Intro
1:46 How To Create Patches

[gabrielstevens]

I contacted Jay about this topic after his initial video and he was incredibly helpful and kind with his time in answer my questions.

[stigsy]

If you put the IR in the row below you can have one effect more!!!

[TVoltG]

Oh this is the video I have been wanting to see. Thank you Jay. Will be home early today and will watch this fully with my monitors.

[GOWepic]

Thank you very much for your help. Rock on!

[hugo]

amazing vids! thanks for the explanation. I'm about to buy one of these. Do you know if using the y - A/B can be used to split the signal at the end of the chain to 2 different EQs amd both going to 2 tube amps on stage? are there phasing problems?

[Elektrifekt]

I would love to take guitar lessons from this guy.

[vintagetone]

Very nice upload my friend.superb player.👍⚘🌹⚘🌹⚘⚘🎸🎸

[josegeraldino]

Great video. The fact that you can't us more effects, they may need to send some updates tu optimize that DSP problem.

[danielsandoval]

Hello Jay, loved the video and helped a lot. Do you know how to record mic or voice (i have a microphone connected with xlr) but logic does not read it. Can you help me out? Thanks!!

[proggydan]

I want to use this device with an electric gtr and also an acoustic gtr. Can I set up the balanced XLR outputs so that Elect goes out one of the XLR outputs to FOH, and the acoustic out the other to FOH?

[siena]

Jay, nice one great video!! I noticed in the recently released 1.04 firmware update for this unit it now has 'No Cab function added (Global > I/O'.. does this mean you can switch off and cab/IR in that particular out put, so you can go straight to power amp and cab, therefore freeing up some much needed extra DSP?

[BrongosBrongos-zvzt]

how about when used for live performances? is the audio produced quite satisfying? usually multi effects made in China when used for live performances the sound produced is not good such as thin, lacking power, or not open enough.
because I once had a NUX MG30 when used for live performances the sound produced felt less open, thin and weak

[pallobomba]

Amazing. Do you know if Ampero II Stomp have the same feature of send one signal to PA and the other to a power amp into a cab thanks

[billy]

Hi Jay! I saw your Yamaha thr, have you tried the hotone stage with the Yamaha in flat mode? I would be interested to know if it sounds good?

[fhhghggf]

Hi mate great videos...can it not be set up so that all presets/scenes have a cabinet on the xlr outs..to front of house and no cabinet on the jack outputs?..that wld leave the fx loop free to use for other pedals

[joinerleal]

I'm new to this and I'm really strugling with the whole concept of patches/presets/scenes, why should i have scenes if i already have presets inside the desired patch? it doesnt make sense to me. How do you organize it in a real use case escenario? a patch for a song? but again why would i want scenes if i have presets.

I'm sorry just feeling overwhelmed with so many options

[jepoyfilosopo]

Hi Jay! New subscriber here 😊😊😊, can you explain these i/o settings oultput Left

No cab, cab only, ir only, cab/ir

[oz.faemine]

Is this possible on the Amperso II Stomp?

[seven]

How would the cabling look like on stage for front of house (no cab, no amp used)?

[pallobomba]

Hello. Could I send the signal to a Power Amp through the R Output instead through the FX Send? Thank you