Mill SMALL Parts on a GIANT CNC Vacuum Table

Показать описание

I needed a way to hold small parts to my CNC that didn't involve tape, screws, or clamps. So I used the HUGE vacuum table on my CNC to hold small parts.

🎥 What to Watch Next:

➤Plans from this video:

➤Support the Woodshop Mike Channel:

➤Thank you to these partners for supporting my channel. Go check them out!

➤FOLLOW:

#cnc #workholding #cncmachining

1 Timothy 1:15-17

Рекомендации по теме

Комментарии

Mike that was incredible! I’m thoroughly impressed with all that went into that programming. 😮

OakHillMillworks

This is really helpful -- I have a Shopsabre Pro 408 and want to make a lot of smaller parts on it, and have been pretty intimidated by the process, so I really appreciate this video

skrfindley

very cool idea, I wasn't sold on a vac table for my cnc build until seeing how easy the smaller jigs can be

Ttenkampf

Wouldn’t 4th axis work better for you in these type of scenarios?

SecSTionStockSnail

I have a ShopBot too 96"x 48"

RCjunkie

Thank you much for this! I'm looking to do something very similar for my builds and this is very helpful. My only question is it appears that you put the ply over your regular MDF spoilboard, correct? I assume you cut the bleeder hole straight through the fixture ply and the MDF spoilboard to expose the port on the vacuum bed. If that's the case, then did you subsequently have to plug the hole in the spoilboard after this project, after your removed the fixture?

I'd like to be able to easily flip back and forth between the fixture and the spoilboard but I would think that once you put a bleeder hole in your spoilboard, you're going to lose the vacuum pulling through the rest of it. Though would suck to have to switch spoilboards or swap a huge 4x8 sheet of (heavy) MDF every time. Hopefully that makes sense. If so, how did you deal with this? Thanks again for a great and very helpful video.

pjaromin

I love to make a guitar for a friend on mine

RCjunkie

Do you have a link for the gasket material?

JohnDoe-ub

Can you tell me what your grid gasket is made ftom, and its dimensions?

acerjuglans

Mike, very impressive! Which vacuum pump do you use?

winywohlwend

Mill SMALL Parts on a GIANT CNC Vacuum Table

Mill SMALL Parts on a GIANT CNC Vacuum Table

Small CNC machining tools- Good tools and machinery make work easy

DuoForceCut - Ideal for machining small parts of 12 mm or smaller diameters

CNC Mill Setup and Milling Small 304 Stainless Parts

Clamping Thin and Irregularly shaped parts in the mill

How to Efficiently Machine Small Parts with Polygon Milling. #cnclathe #cnc #machine

Milling of small and complex forms of parts on CNC HAAS Mini Mill

I Bought A Minimill to see if they are Worth It

5 Axis Machining Incredible Grip

Machining Small parts using 4th axis concept on manual mill

A Benchtop Mill That Can Actually Cut Metal! ⚙️🔥 #cnc #machining

CNC Super Glue Fixturing: Cheap, Reliable Workholding!

Do Not Machine THIN Parts Unless You Know These Machinist Tricks

Holding Parts on a CNC Milling Machine without Gaskets, Tape, or Glue

Secret to Getting a Great Finish on Small Parts🤫

Mini Hobby CNC Machine - SYIL X5 | SYIL Machines Demo

Machining Chips Slo-Mo (Big and Small Parts)

Milling on HAAS Mini Mill HE

THIS is why machining is so impressive! 🤯

Getting Started In Machining - Absolute Beginners Click Here!

Impressive CNC Lathe Machine Turning

Easy Low Profile Side Clamps For The Milling Machine

Turning Small Parts on a Lathe

Making very small parts on the 1100M+