filmov
tv
TronXY X5S Marlin 2.0.x & SKR v1.3 & TMC2208 upgrade
Показать описание
In this episode, I will walk you through another TronXY X5S motherboard upgrade.
This time, we will upgrade our electronics with an SKR v1.3 & TMC2208 drivers.
The motherboard choice, was dictated by the low cost, the high computing power, and the simplicity of the "jumper configured" UART support.
In order to put the driver in UART working mode, you will have to weld J2. The pads connected, are *the two closest to the potentiometer* (or the three holes).
I have used two TMC2208 for X/Y and two A4988 for the parallel Z motors and my extruder (A4988 have less resolution but they can handle more peak Amps, and are immune to skipping steps, if configured correctly. Keep in mind that both Z and E0 are geared, therefore they already have, more than 400 steps per mm)
This time, we will upgrade our electronics with an SKR v1.3 & TMC2208 drivers.
The motherboard choice, was dictated by the low cost, the high computing power, and the simplicity of the "jumper configured" UART support.
In order to put the driver in UART working mode, you will have to weld J2. The pads connected, are *the two closest to the potentiometer* (or the three holes).
I have used two TMC2208 for X/Y and two A4988 for the parallel Z motors and my extruder (A4988 have less resolution but they can handle more peak Amps, and are immune to skipping steps, if configured correctly. Keep in mind that both Z and E0 are geared, therefore they already have, more than 400 steps per mm)
0:05:22
TronXY X5S Marlin 2.0.x & SKR v1.3 & TMC2208 upgrade
0:24:31
What Tronxy Firmware do I Have?And How To Change It
0:16:00
Tronxy to Marlin Updated with new Procedure.
0:00:23
#3dprinter #diy #hypercube #tronxy Diy Tronxy X5S with marlin firmware base hypercube
0:00:29
Testing out live Marlin Firmware Compiling for TRONXY MotherBoards
0:12:59
Bltouch on Tronxy 3D Printers how to upgrade
0:00:14
Full MKS LGVG UI on Tronxy
0:00:35
Tronxy Mainboard Melzi 2 0 1284P Motherboard no firmware, no bootloader issue
0:00:13
modded X5SA running makerbase with marlin 2.0
0:01:05
Tmc2208, Marlin Tronxy X5
0:03:39
Complete video tutorial for burning 103 firmware(flash X5SA MARLIN)
0:00:52
Tronxy X5SA 400 mit Marlin Firmware, schnell kann auch der X5sa 400 !
0:37:51
Upgrade Marlin Firmware - Part 2 Config Technical
0:07:13
Tronxy X5SA (Pro) Marlin Menüs der Color Ui inkl Codes M413 u. G34
0:05:09
Autobed-Leveling fast für Nüsse - Tronxy X5S mit Servo und Microschalter
0:51:27
Tronxy X5S átépítés 7.rész (Biqu SKR 1.1 és Marlin 2.0 firmware)
0:04:24
Core XY Marlin 2, with 3d Touch (bltouch clone)
0:52:09
Upgrade TRONXY XY2PRO. Установка Директ экструдер NF-WIND V6 , прошивка Marlin 2.0...
0:16:11
Why TronXY X5? - Assemble, review, test
0:00:22
Tronxy X5SA Pro Nozzle cleaning with a brush
0:02:53
MKS SBASE & Marlin 2.0.x
0:02:32
Core XY Marlin 2, dual Z motors auto align
0:19:56
Marlin 2.0.7.2 auf Tronxy X5SA Pro + Marlin Vorbereitung Projekt Eigenbau 5
0:00:08
Tronxy XY-2-- Fix power off resume parts
Комментарии